SHEFFIELD VILLAGE, OH ·
OSHA Inspection: J.D. INDOOR COMFORT, INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of J.D. INDOOR COMFORT, INC. in 4040 COLORADO AVE., SHEFFIELD VILLAGE, OH 44054 (NAICS 332322). OSHA activity number 334232857.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- J.D. INDOOR COMFORT, INC.
- Site address
- 4040 COLORADO AVE.
- City
- SHEFFIELD VILLAGE
- State
- OH
- ZIP
- 44054
- Mailing
- 4040 COLORADO AVE., SHEFFIELD VILLAGE, OH 44054
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- Union (A)
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332322
- Employees
- 12
- Ownership type
- Private (A)
Citations
4 citations on file for this inspection.
1910.178 L01 I
- Issued
- Sep 20, 2012
- Penalty
- Initial $2,000 · Current $700 Reduced
General-duty citation text
29 CFR 1910.178(l)(1)(i): The employer did not ensure that each powered industrial truck operator was competent to operate a powered industrial truck safely, as demonstrated by the successful completion of the training and evaluation specified in this paragraph (l) J.D. Indoor Comfort, Inc., located at 4040 Colorado Ave., Sheffield, OH 44054: On or about May 9, 2012, the employer did not ensure that the employee, operating Toyota forklift (Model 2FBCA15, Serial # 2FBCA15-13273), is competent to complete the task, exposing employees to struck-by, caught in between, and tip-over hazards. The employer did not ensure that each forklift operator received formal instructions and practical training on how to operate a powered industrial vehicle, as well as operators performance was not evaluated. No additional abatement information is needed for this item.
Recent events (2)
- · I (S) $700
- · Z (S) $2000
1910.178 Q07
- Issued
- Sep 20, 2012
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.178(q)(7): Industrial trucks were not examined before being placed in service, or were placed in service if the examination showed conditions adversely affecting the safety of the vehicle J.D. Indoor Comfort, Inc., located at 4040 Colorado Ave., Sheffield, OH 44054: On or about May 9, 2012, the employer did not ensure that daily examinations of Toyota forklift (Model 2FBCA15, Serial # 2FBCA15-13273) were conducted before being put into service, exposing employees to employees to struck-by, caught in between, and tip-over hazards. No additional abatement information is needed for this item.
Recent events (2)
- · I (S) $0
- · Z (S) $0
1910.219 D01
- Issued
- Sep 20, 2012
- Penalty
- Initial $1,600 · Current $560 Reduced
General-duty citation text
29 CFR 1910.219(d)(1): Pulley(s) with part(s) seven feet or less from the floor or work platform were not guarded in accordance with the requirements specified in 29 CFR 1910.219(m) and (o): J.D. Indoor Comfort, Inc., located at 4040 Colorado Ave., Sheffield, OH 44054: On or about May 9, 2012, the employer failed to ensure that the pulley and the drive belt on 22 Gauge Lockformer Button Lock Machine (Serial # 1-013) were guarded, exposing employees to the in-going nip point and caught-in hazards if caught between the pulley and the drive belt. No additional abatement information is needed for this item.
Recent events (2)
- · I (S) $560
- · Z (S) $1600
1910.219 E03 I
- Issued
- Sep 20, 2012
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.219(e)(3)(i): Vertical or inclined belt(s) were not enclosed by guard(s) conforming to the requirements specified at 29 CFR 1910.219(m) and (o): J.D. Indoor Comfort, Inc., located at 4040 Colorado Ave., Sheffield, OH 44054: On or about May 9, 2012, the employer did not unsure that the vertical drive belt on 22 Gauge Lockformer Button Lock Machine (Serial # 1-013) is enclosed by a guard, exposing employees to in-going nip point and caught-in hazards if caught between the drive belt and the pulley. No additional abatement information is needed for this item.
Recent events (2)
- · I (S) $0
- · Z (S) $0
More inspections in this industry (NAICS 332322)
More inspections in OH
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 334232857.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.