BLOOMINGTON, IL —
OSHA Inspection: BILL SMITH AUTO PARTS, INC.
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of BILL SMITH AUTO PARTS, INC. in 2102 S. BUNN STREET, BLOOMINGTON, IL 61701 (NAICS 423120). OSHA activity number 334243656.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- BILL SMITH AUTO PARTS, INC.
- Site address
- 2102 S. BUNN STREET
- City
- BLOOMINGTON
- State
- IL
- ZIP
- 61701
- Mailing
- 2102 S. BUNN STREET, BLOOMINGTON, IL 61701
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 423120
- Employees
- 6
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.36 D01
- Issued
- Jul 13, 2012
- Abate by
- Sep 15, 2012
- Penalty
- Initial $1,600 · Current $1,120 Reduced
General-duty citation text
29 CFR 1910.36(d)(1): Employee(s) were not able to open an exit route door from the inside at all times without keys, tools, or special knowledge: Employees working in the back warehouse were exposed to smoke inhalation. 1. The north emergency exit was sealed shut with 2x4 inch pieces of wood nailed to the walls and doorjambs. 2. The south emergency exit was sealed shut with 2x4 inch pieces of wood nailed to the walls and doorjambs.
Recent events (3)
- — F (S) $1120
- — C (S) $1600
- — Z (S) $1600
1910.303 G01 I
- Issued
- Jul 13, 2012
- Abate by
- Aug 3, 2012
- Penalty
- Initial $2,000 · Current $1,400 Reduced
General-duty citation text
29 CFR 1910.303(g)(1)(i): Work space was less than 30 inches wide in front of electric equipment operating at 600 volts, nominal, or less: Employees working in the warehouses were exposed to electrical hazards. 1. An electric panel on the north wall of the front warehouse was blocked by a work bench. 2. An electric panel in the back warehouse storage room was blocked by spare auto parts.
Recent events (3)
- — F (S) $1400
- — C (S) $2000
- — Z (S) $2000
1910.305 B01
- Issued
- Jul 13, 2012
- Abate by
- Aug 3, 2012
- Penalty
- Initial $2,000 · Current $0 Reduced
General-duty citation text
29 CFR 1910.305(b)(1): Unused openings in boxes, cabinets, or fittings were not effectively closed: Employees working behind the counter in the front office were exposed to electrical hazards because three fuses were missing from an electric panel and no covering had been installed to prevent accidental contact.
Recent events (3)
- — F (S) $0
- — C (S) $2000
- — Z (S) $2000
1910.178 P01
- Issued
- Jul 13, 2012
- Abate by
- Aug 3, 2012
- Penalty
- Initial $4,000 · Current $2,800 Reduced
General-duty citation text
29 CFR 1910.178(p)(1): Powered industrial truck(s) found to be in need of repair, defective, or in any way unsafe had not been taken out of service until restored to safe operating condition(s): Employees working in areas where a forktruck was being operated were exposed to struck-by hazards because the parking brake on the forktruck was not functioning and it had not been removed from service. THE BILL SMITH AUTO PARTS, INC. WAS PREVIOUSLY CITED FOR A VIOLATION OF THIS OCCUPATIONAL SAFETY AND HEALTH STANDARD OR ITS EQUIVALENT STANDARD 29 CFR 1910.178(q)(1) WHICH WAS CONTAINED IN OSHA INSPECTION NUMBER 314848938, CITATION NUMBER 1, ITEM NUMBER 6a, AND WAS AFFIRMED AS A FINAL ORDER ON MAY 24, 2011, WITH RESPECT TO A WORKPLACE LOCATED AT 3405 COUNTY VIEW ROAD, URBANA, IL 61802.
Recent events (3)
- — F (R) $2800
- — C (R) $4000
- — Z (R) $4000
1910.178 Q07
- Issued
- Jul 13, 2012
- Abate by
- Aug 3, 2012
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.178(q)(7): Industrial trucks were not examined before being placed in service, or were placed in service if the examination showed conditions adversely affecting the safety of the vehicle: Employees working in areas where a forktruck was being operated were exposed to struck-by hazards because the parking brake on the forktruck was not functioning and it had not been removed from service. THE BILL SMITH AUTO PARTS, INC. WAS PREVIOUSLY CITED FOR A VIOLATION OF THIS OCCUPATIONAL SAFETY AND HEALTH STANDARD OR ITS EQUIVALENT STANDARD 29 CFR 1910.178(q)(7) WHICH WAS CONTAINED IN OSHA INSPECTION NUMBER 314848938, CITATION NUMBER 1, ITEM NUMBER 6b, AND WAS AFFIRMED AS A FINAL ORDER ON MAY 24, 2011, WITH RESPECT TO A WORKPLACE LOCATED AT 3405 COUNTY VIEW ROAD, URBANA, IL 61802.
Recent events (3)
- — F (R) $0
- — C (R) $0
- — Z (R) $0
More inspections at Bill Smith Auto Parts, INC.
View Bill Smith Auto Parts, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 423120)
More inspections in IL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 334243656.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.