Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: MCKINNEY LUMBER, INC.

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of MCKINNEY LUMBER, INC. in 514 HIGHWAY 43 SOUTH, TUSCUMBIA, AL 35674 (NAICS 321113). OSHA activity number 334250750.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Mckinney Lumber, INC. — free Get an email when a new federal OSHA severe-injury report for Mckinney Lumber, INC. is published. One employer, no account, unsubscribe in one click.
Site address
514 HIGHWAY 43 SOUTH
City
TUSCUMBIA
State
AL
ZIP
35674
Mailing
514 HIGHWAY 43 SOUTH, TUSCUMBIA, AL 35674
Inspection type
Planned (H)
Scope
Complete (A)
Discipline
Safety
Advance notice
Yes
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
321113
Employees
27
Ownership type
A

6 citations on file for this inspection.

1910.215 B09

Serious Gravity 1 1 instance 1 exposed
Issued
Sep 5, 2012
Abate by
Sep 12, 2012
Penalty
Initial $2,100 · Current $1,050 Reduced
29 CFR 1910.215(b)(9):  The distance between the abrasive wheel periphery(ies) and the adjustable tongue or the end of the safety guard peripheral member at the top exceeded one-fourth inch:    (a) On or about 5/3/12 - Maintenance Workshop, a Black & Decker 6-inch bench grinder had tongue guards that were not adjusted within 1/4 of an inch.
Recent events (2)
  • — I (S) $1050
  • — Z (S) $2100

1910.265 C04 IV

Serious Gravity 5 2 instances 2 exposed
Issued
Sep 5, 2012
Abate by
Oct 10, 2012
Penalty
Initial $3,500 · Current $1,750 Reduced
29 CFR 1910.265(c)(4)(iv): Elevated platform(s), 4 feet or more from the floor level, were not provided with a standard railing:    (a)  On or about 5/3/12 - Debarker Live Deck, elevated deck was missing guardrails.    (b) On or about 5/3/12 - Three Head Band Saw Area, an elevated platform was missing a mid-rail.
Recent events (2)
  • — I (S) $1750
  • — Z (S) $3500

1910.265 D04 III

Serious Gravity 10 1 instance 26 exposed
Issued
Sep 5, 2012
Abate by
Oct 10, 2012
Penalty
Initial $4,900 · Current $2,450 Reduced
29 CFR 1910.265(d)(4)(iii): Hazardous area(s) around ring barker(s) and their conveyor(s) were not fenced off or posted as a prohibited area for unauthorized personnel:    (a) On or about 5/3/12 - Log Conveyor Line and Barker Area, these areas were not fenced nor were they posted as prohibited areas for unauthorized personnel.
Recent events (2)
  • — I (S) $2450
  • — Z (S) $4900

1910.157 G02

Other-than-serious 1 instance 27 exposed
Issued
Sep 5, 2012
Abate by
Oct 10, 2012
Penalty
Initial $0 · Current $0
29 CFR 1910.157(g)(2):  The employer shall provide the education required in paragraph (g)(1) of this section upon initial employment and at least annually thereafter.    (a) On or about 5/3/12 - Throughout the Facility, employees expected to use fire extinguishers in the event of a fire had not been trained.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

1910.212 A05

Other-than-serious 1 instance 1 exposed
Issued
Sep 5, 2012
Abate by
Sep 12, 2012
Penalty
Initial $0 · Current $0
29 CFR 1910.212(a)(5): Fan blade guards, where the periphery of the blades was less than seven feet above the floor or working level, had openings larger than one-half inch:    (a)  On or about 5/3/12 - Slab End Trim Area, a floor fan had a guard with openings more than one inch wide.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

1910.265 C05 I

Other-than-serious 1 instance 1 exposed
Issued
Sep 5, 2012
Penalty
Initial $0 · Current $0
29 CFR 1910.265(c)(5)(i): Stairways were not constructed in accordance with 1910.24:    (a) On or about 5/3/12 - Wood Chipper Area, the stars leading to the platform above the wood chipper conveyor were uneven.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

View Mckinney Lumber, INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 334250750.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.