Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,194,531Inspections Most recent open 2026-08-11 Last loaded 2026-08-14

OSHA Inspection: ECH CONSTRUCTION

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of ECH CONSTRUCTION in 7701 REYNOLDS ROAD, MENTOR, OH 44060 (NAICS 238190). OSHA activity number 334251329.

What this inspection record means

OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch ECH Construction for free Get an email when a new federal OSHA severe-injury report for ECH Construction is published. One employer, no account, unsubscribe in one click.
Establishment
ECH CONSTRUCTION
Site address
7701 REYNOLDS ROAD
City
MENTOR
State
OH
ZIP
44060
Mailing
15730 AGLER ROAD, GARRETTSVILLE, OH 44231
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
Non-union (B)
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238190
Employees
6
Ownership type
Private (A)

3 citations on file for this inspection.

1926.403 B02

Serious Gravity 1 1 instance 5 exposed
Issued
May 16, 2012
Abate by
May 23, 2012
Penalty
Initial $1,200 · Current $400 Reduced
29 CFR 1926.403(b)(2):  Installation and use. Listed, labeled, or certified equipment shall be installed and used in accordance with instructions included in the listing, labeling, or certification:      On site at 7701 Reynolds Road, Mentor, Ohio:  Two junction boxes, designed for permenant installation, were used as extension cords to power equipment incluidng but not limited to a Milwaukee Saws-All and a DeWalt radial saw.
Recent events (2)
  • · I (S) $400
  • · Z (S) $1200

1926.404 B01 III C

Serious Gravity 1 1 instance 5 exposed
Issued
May 16, 2012
Abate by
May 19, 2012
Penalty
Initial $0 · Current $0
29 CFR 1926.404(b)(1)(iii)(C):  Each cord set, attachment cap, plug and receptacle of cord sets, and any equipment connected by cord and plug, except cord sets and receptacles which are fixed and not exposed to damage, shall be visually inspected before each day's use for external defects, such as deformed or missing pins or insulation damage, and for indications of possible internal damage. Equipment found damaged or defective shall not be used until repaired:    On site at 7701 Reynolds Road, Mentor, Ohio:  The outer jacket of insulation on an extension cord used by employees was damaged, exposing the inner conductors of the cord.
Recent events (2)
  • · I (S) $0
  • · Z (S) $0

1926.503 A02 II

Serious Gravity 5 1 instance 5 exposed
Issued
May 16, 2012
Abate by
Jun 6, 2012
Penalty
Initial $2,000 · Current $800 Reduced
29 CFR 1926.503(a)(2)(ii):  The employer did not ensure that employees were trained, by a qualified perosn, in the correct procedures for erecting, maintaining, disassembling, and inspecting the fall protection systems to be used:      On site at 7701 Reynolds Road, Mentor, Ohio:  Two separately-installed anchors used by employees for personal fall arrest systems were not installed as per the manufacturer's instructions which stated that every hole on the anchors (32 of them) needed to be filled with 12x2 inch screws.  One anchor had 4 screws and the other had 6 screws.
Recent events (2)
  • · I (S) $800
  • · Z (S) $2000

View ECH Construction's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 334251329.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.