Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: HAUCK ENTERPRISES, LTD

Complaint inspection · Safety discipline

On , OSHA opened a complaint safety inspection of HAUCK ENTERPRISES, LTD in 550 N NOVA ROAD, ORMOND BEACH, FL 32174 (NAICS 238910). OSHA activity number 334259751.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Hauck Enterprises, LTD — free Get an email when a new federal OSHA severe-injury report for Hauck Enterprises, LTD is published. One employer, no account, unsubscribe in one click.
Site address
550 N NOVA ROAD
City
ORMOND BEACH
State
FL
ZIP
32174
Mailing
550 N NOVA ROAD, ORMOND BEACH, FL 32174
Inspection type
Complaint (B)
Scope
Complete (A)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238910
Employees
1
Ownership type
A

8 citations on file for this inspection.

1910.151 C

Serious Gravity 1 1 instance 1 exposed
Issued
Jun 1, 2012
Penalty
Initial $1,020 · Current $612 Reduced
29 CFR 1910.151(c):  Where employees were exposed to injurious corrosive materials, suitable facilities for quick drenching or flushing of the eyes and body were not provided within the work area for immediate emergency use:    a. On or about May 9, 2012, near the maintenance barn, the eyewash station was not operating, exposing employees to eye injury.    ABATEMENT CERTIFICATION AND DOCUMENTATION ARE NOT REQUIRED
Recent events (2)
  • — I (S) $612
  • — Z (S) $1020

1910.215 A02

Serious Gravity 5 1 instance 1 exposed
Issued
Jun 1, 2012
Penalty
Initial $1,360 · Current $816 Reduced
29 CFR 1910.215(a)(2):  Abrasive wheel(s) used on grinding machinery were not provided with safety guard(s) which covered the spindle end, nut, flange projections:    a. On or about May 9, 2012, in the maintenance barn, the bench grinder did not have a spindle guard, exposing employees to being caught in the rotating parts.    ABATEMENT CERTIFICATION AND DOCUMENTATION ARE NOT REQUIRED
Recent events (2)
  • — I (S) $816
  • — Z (S) $1360

1910.215 A04

Serious Gravity 5 1 instance 1 exposed
Issued
Jun 1, 2012
Penalty
Initial $0 · Current $0
29 CFR 1910.215(a)(4): Grinding machinery was not used with work rest(s) to support offhand grinding work:    a. On or about May 9, 2012, in the maintenance barn, the bench grinder did not have a work rest, exposing employees to being struck by the rotating wheel.    ABATEMENT CERTIFICATION AND DOCUMENTATION ARE NOT REQUIRED
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.215 B09

Serious Gravity 5 1 instance 1 exposed
Issued
Jun 1, 2012
Penalty
Initial $0 · Current $0
29 CFR 1910.215(b)(9): Guard for abrasive wheel machine where the operator stands in front of the machine was not constructed so that the peripheral protecting member could be adjusted to the constantly decreasing diameter of the wheel:    a. On or about May 9, 2012, in the maintenance barn, the bench grinder did not have an adjustable tongue guard, exposing employees to being struck by the rotating wheel.    ABATEMENT CERTIFICATION AND DOCUMENTATION ARE NOT REQUIRED
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.1200 E01

Serious Gravity 1 1 instance 1 exposed
Issued
Jun 1, 2012
Abate by
Jul 16, 2012
Penalty
Initial $600 · Current $360 Reduced
29 CFR 1910.1200(e)(1): The employer did not develop, implement, and/or maintain at the workplace a written hazard communication program which describes how the criteria specified in 29 CFR 1910.1200(f), (g), and (h) will be met:    a. On or about May 9, 2012, the employer did not develop, implement, a written hazardous communication program for employees working with hazardous materials such as oil based and water based paints, engine starting fluid, WD-40, engine oil, lubricants, thinners, gasoline, grease, spray paints, pesticides, industrial and cleaning products.    ABATEMENT CERTIFICATION AND DOCUMENTATION ARE REQUIRED
Recent events (2)
  • — I (S) $360
  • — Z (S) $600

1910.1200 G01

Serious Gravity 1 11 instances 2 exposed
Issued
Jun 1, 2012
Abate by
Jul 16, 2012
Penalty
Initial $0 · Current $0
29 CFR 1910.1200(g)(1): The employer did not have a material safety data sheet for each hazardous chemical in use:    a.  On or about May 9, 2012, in the maintenance barn, the employer did not have material safety data sheets (MSDS) for the chemicals that employees used such as but not limited to the following:    1.   CLR Rust Lime & Rust Remover - corrosive  2.   Conquest Rust Remover - corrosive  3.   Muriatic Acid - corrosive  4.   Oil based paints, water based paints - irritant  5.   Engine starting fluid, WD-40, engine oil, lubricants - irritant  6.   Thinners - irritant   7.   Gasoline - flammable  8.   Grease - irritant  9.   Aerosol paints - irritant  10. Pesticides - toxic  11. Cleaning products - corrosive
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.1200 H

Serious Gravity 1 11 instances 2 exposed
Issued
Jun 1, 2012
Abate by
Jul 16, 2012
Penalty
Initial $0 · Current $0
29 CFR 1910.1200(h): Employees were not provided effective information and training as specified in 29 CFR 1910.1200(h)(1) and -2 on hazardous chemicals in their work area at the time of their initial assignment and whenever a new hazard was introduced into thier work area:    a.  On or about May 9, 2012, employees were not trained regarding the hazards of chemicals they used such as but not limited to the following:    1.   CLR Rust Lime & Rust Remover - corrosive  2.   Conquest Rust Remover - corrosive  3.   Muriatic Acid - corrosive  4.   Oil based paints, water based paints - irritant  5.   Engine starting fluid, WD-40, engine oil, lubricants - irritant  6.   Thinners - irritant   7.   Gasoline - flammable  8.   Grease - irritant  9.   Aerosol paints - irritant  10. Pesticides - toxic  11. Cleaning products  corrosive
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1926.651 K01

Serious Gravity 1 1 instance 2 exposed
Issued
Jun 1, 2012
Abate by
Jul 16, 2012
Penalty
Initial $1,200 · Current $720 Reduced
29 CFR 1926.651(k)(1):  An inspection of the excavations, the adjacent areas, and protective systems was not conducted by the competent person prior to the start of work and as needed throughout the shift:    a. On or about May 10, 2012, in location B-1of the cemetery, the excavation and the protective systems were not inspected by a competent person prior to start of work and as need throughout the shift, exposing employees to cave-in hazards.    ABATEMENT CERTIFICATION AND DOCUMENTATION ARE REQUIRED
Recent events (2)
  • — I (S) $720
  • — Z (S) $1200

View Hauck Enterprises, LTD's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 334259751.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.