ROCKLAND, ME ·
OSHA Inspection: SHARP'S POINT SOUTH
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of SHARP'S POINT SOUTH in 75 MECHANIC STREET, ROCKLAND, ME 04841 (NAICS 712110). OSHA activity number 334320561.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- SHARP'S POINT SOUTH
- Site address
- 75 MECHANIC STREET
- City
- ROCKLAND
- State
- ME
- ZIP
- 04841
- Mailing
- 75 MECHANIC STREET, ROCKLAND, ME 04841
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 712110
- Employees
- 2
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.213 B03
- Issued
- May 21, 2012
- Abate by
- May 24, 2012
- Penalty
- Initial $2,000 · Current $1,000 Reduced
General-duty citation text
29 CFR 1910.213(b)(3): Provisions were not made to prevent woodworking machine(s) from automatically restarting upon restoration of power after a power failure: At the Facility - The Craftsman table saw was not equipped with an anti-magnetic restart device or other similar device.
Recent events (2)
- · I (S) $1000
- · Z (S) $2000
1910.213 C01
- Issued
- May 21, 2012
- Abate by
- May 24, 2012
- Penalty
- Initial $2,000 · Current $1,000 Reduced
General-duty citation text
29 CFR 1910.213(c)(1): Circular handfed ripsaw(s) were not guarded by an automatically adjusting hood which completely enclosed that portion of the saw above the table and above the material being cut: At the Facility - The Craftsman table saw, used for ripping and cross cutting, was not equipped with a hood guard.
Recent events (2)
- · I (S) $1000
- · Z (S) $2000
1910.213 C02
- Issued
- May 21, 2012
- Abate by
- May 24, 2012
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.213(c)(2): Hand-fed circular ripsaw(s) were not furnished with a spreader to prevent material from squeezing the saw or being thrown back on the operator: At the Facility - The hand fed table saw, used for both ripping and cross cutting, was not equipped with a spreader.
Recent events (2)
- · I (S) $0
- · Z (S) $0
1910.213 C03
- Issued
- May 21, 2012
- Abate by
- May 24, 2012
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.213(c)(3): Hand-fed ripsaw(s) did not have non kickback fingers or dogs so located as to oppose the thrust or tendency of the saw to pick up the material or to throw it back toward the operator: At the Facility - The hand-fed table saw, used for ripping, was not equipped with anti-kickback fingers or dogs.
Recent events (2)
- · I (S) $0
- · Z (S) $0
1910.181 C01
- Issued
- May 21, 2012
- Abate by
- Jun 5, 2012
- Penalty
- Initial $2,000 · Current $0 Reduced
General-duty citation text
29 CFR 1910.181(c)(1): Permanently installed derrick(s) with fixed lengths of boom, guy, and mast were not provided with substantial, durable, and clearly legible rating chart(s) securely affixed where visible to personnel responsible for the safe operation of the equipment: Outside at the Facility - The load rating of the gin pole derrick was not available or affixed to the equipment.
Recent events (2)
- · I (O) $0
- · Z (S) $2000
More inspections in this industry (NAICS 712110)
More inspections in ME
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 334320561.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.