CHARLESTON, SC —
OSHA Inspection: CAROLINA CONTRACTING SOLUTIONS, INC.
Special Programs inspection · Safety discipline
At a glance
On , OSHA opened a special Programs safety inspection of CAROLINA CONTRACTING SOLUTIONS, INC. in 1044 PIERSIDE STREET, CHARLESTON, SC 29405 (NAICS 236210). OSHA activity number 334342136.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- CAROLINA CONTRACTING SOLUTIONS, INC.
- Site address
- 1044 PIERSIDE STREET
- City
- CHARLESTON
- State
- SC
- ZIP
- 29405
- Mailing
- 1318 HWY 61, RIDGEVILLE, SC 29472
What kind of inspection was it?
- Inspection type
- Special Programs (K)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 236210
- Employees
- 4
- Ownership type
- A
Citations
7 citations on file for this inspection.
1910.178 L
- Issued
- Jun 20, 2012
- Abate by
- Jul 5, 2012
- Penalty
- Initial $3,500 · Current $1,750 Reduced
General-duty citation text
29 CFR 1910.178(l): Operators were not trained in the safe operation of powered industrial trucks: a) Northwest side of building: An employee operating a Lull telescopic forklift ID number FL5 could not produce documentation indicating that he had been trained by the employer to safely operate a forklift. ABATEMENT CERTIFICATION IS REQUIRED
Recent events (2)
- — I (S) $1750
- — Z (S) $3500
1926.451 C02 V
- Issued
- Jun 20, 2012
- Abate by
- Jun 21, 2012
- Penalty
- Initial $4,900 · Current $2,450 Reduced
General-duty citation text
29 CFR 1926.451(c)(2)(v): The employer used forklifts to support scaffold platforms without ensuring that the entire platform was attached to the forks. a) Northwest side of the building: A wooden shipping pallet used for lifting personnel was only slipped on top of the forks of a Lull telescopic forklift, ID number FL5 and it was not secured to the forks. Employees were exposed to falls of up to 24 feet.
Recent events (2)
- — I (S) $2450
- — Z (S) $4900
1926.451 G01
- Issued
- Jun 20, 2012
- Abate by
- Jun 21, 2012
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.451(g)(1): Each employee on a scaffold more than 10 feet (3.1 m) above a lower level shall be protected from falling to that lower level. a) Northwest end of building: Employees were not protected from falling up to 24 feet when working from a platform used on the forks of Lull telescopic forklift, ID number FL5.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1926.454 A
- Issued
- Jun 20, 2012
- Abate by
- Jul 5, 2012
- Penalty
- Initial $4,900 · Current $2,450 Reduced
General-duty citation text
29 CFR 1926.454(a): The employer shall have each employee who performs work while on a scaffold trained by a person qualified in the subject matter to recognize the hazards associated with the type of scaffold being used and to understand the procedures to control or minimize those hazards. a) Northwest side of the building: Employees working from a scaffold plaform placed on the forks of a forkllift had not been trained to recongnize hazards associated with that scaffold, as evidenced by: The scaffold platform not being equipped with guardrails; The scaffold platform not being properly constructed; and the platform not secured in place.
Recent events (2)
- — I (S) $2450
- — Z (S) $4900
1926.503 A01
- Issued
- Jun 20, 2012
- Abate by
- Jul 5, 2012
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.503(a)(1): The employer shall provide a training program for each employee who might be exposed to fall hazards. The program shall enable each employee to recognize the hazards of falling and shall train each employee in the procedures to be followed in order to minimize these hazards. a) Northwest side of the building on the second floor: Employees working 19 feet above ground level had not been trained by the employer on how to recognize what a fall hazard is, and how to minimize the hazards and protect themselves from falls.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1926.501 B01
- Issued
- Jun 20, 2012
- Abate by
- Jun 21, 2012
- Penalty
- Initial $4,900 · Current $2,450 Reduced
General-duty citation text
29 CFR 1926.501(b)(1): "Unprotected sides and edges." Each employee on a walking/working surface (horizontal and vertical surface) with an unprotected side or edge which is 6 feet (1.8 m) or more above a lower level shall be protected from falling by the use of guardrail systems, safety net systems, or personal fall arrest systems. a) 2nd floor doorway opening, northwest side of the building: Employees working in the doorway opening were exposed to falls of 19 feet, and they were not protected from falling by using personal fall arrest stystems, guardrail systems or other means.
Recent events (2)
- — I (S) $2450
- — Z (S) $4900
1926.50 D01
- Issued
- Jun 20, 2012
- Abate by
- Jun 21, 2012
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.50(d)(1): First aid supplies shall be easily accessible when required. a) Worksite: There was no first aid kit available at the worksite. ABATEMENT CERTIFICATION IS REQUIRED
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections in this industry (NAICS 236210)
More inspections in SC
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 334342136.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.