Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,191,871Inspections Most recent open 2026-07-30 Last loaded 2026-08-03

OSHA Inspection: BLANCO DESIGN

Programmed Related inspection · Safety discipline

On , OSHA opened a programmed Related safety inspection of BLANCO DESIGN in 73 GLENWILD AVENUE, MADISON, NJ 07940 (NAICS 238990). OSHA activity number 334355518.

What this inspection record means

OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Blanco Design for free Get an email when a new federal OSHA severe-injury report for Blanco Design is published. One employer, no account, unsubscribe in one click.
Establishment
BLANCO DESIGN
Site address
73 GLENWILD AVENUE
City
MADISON
State
NJ
ZIP
07940
Mailing
1972 US HIGHWAY 22, SCOTCH PLAINS, NJ 07076
Inspection type
Programmed Related (J)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Case closed
Last modified
Data loaded
NAICS code
238990
Employees
5
Ownership type
A

7 citations on file for this inspection.

1926.95 A

Serious Gravity 5 1 instance 3 exposed
Issued
Jun 1, 2012
Penalty
Initial $2,400 · Current $2,400
29 CFR 1926.95(a): Protective equipment, including personal protective equipment for eyes, face, head, and extremities, protective clothing, respiratory devices, and protective shields and barriers, shall be provided, used, and maintained in a sanitary and reliable condition wherever it is necessary by reason of hazards of processes or environment, chemical hazards, radiological hazards, or mechanical irritants encountered in a manner capable of causing injury or impairment in the function of any part of the body through absorption, inhalation or physical contact.    a. 75 Glenwild Road, Madison, NJ 07940    Employer did not ensure that protective equipment was used by employees operating a DeWalt cordless brad nailer, thereby exposing employees to eye injuries requiring hospitalization.         Violation observed on or about May 19, 2012
Recent events (1)
  • · Z (S) $2400

1926.300 A

Serious Gravity 10 3 instances 3 exposed
Issued
Jun 1, 2012
Penalty
Initial $2,800 · Current $2,800
29 CFR 1926.300(a): Condition of tools. All hand and power tools and similar equipment, whether furnished by the employer or the employee, shall be maintained in a safe condition.    a. 75 Glenwild Road, Madison, NJ     Employer did not ensure that all power tools were maintained in a safe condition with guards for the compound miter saw, table saw, and portable hand grinder, thereby exposing employees to amputation hazards.         Violation observed on or about May 19, 2012
Recent events (1)
  • · Z (S) $2800

1926.300 B01

Serious Gravity 10 3 instances 3 exposed
Issued
Jun 1, 2012
Penalty
Initial $2,800 · Current $2,800
29 CFR 1926.300(b)(1): When power operated tools are designed to accommodate guards, they shall be equipped with such guards when in use.    a. 75 Glenwild Road, Madison, NJ - West side of house in driveway    Employer did not ensure that power tools (miter saw, grinder, table saw) that were designed to accommodate guards were installed on tool before use,thereby exposing employees to amputation hazards.         Violation observed on or about May 19, 2012
Recent events (1)
  • · Z (S) $2800

1926.451 B01

Serious Gravity 5 1 instance 3 exposed
Issued
Jun 1, 2012
Penalty
Initial $1,600 · Current $1,600
29 CFR 1926.451(b)(1): Each platform on all working levels of scaffolds shall be fully planked or decked between the front uprights and the guardrail supports.      a. 75 Glenwild Rd, Madison, NJ - Front of house in the west side of driveway    Employees were observed working from a tubular framed scaffold that was not fully planked, thereby exposing employess to fall hazards.                      Violation observed on or about May 19, 2012
Recent events (1)
  • · Z (S) $1600

1926.451 C02

Serious Gravity 5 1 instance 3 exposed
Issued
Jun 1, 2012
Penalty
Initial $1,600 · Current $1,600
29 CFR 1926.451(c)(2): Supported scaffold poles, legs, posts, frames, and uprights shall bear on base plates and mud sills or other adequate firm foundation.    A. 75 Glenwild Rd, Madison, NJ - Front of house in the west side of driveway    Tubular framed scaffold used to perform carpentry work did not have base plates, and did not have muds sills or on a firm foundation, thereby exposing employees to fall hazards.                  Violation observed on or about May 19, 2012
Recent events (1)
  • · Z (S) $1600

1926.451 C02 II

Serious Gravity 5 1 instance 3 exposed
Issued
Jun 1, 2012
Penalty
Initial $0 · Current $0
29 CFR 1926.451(c)(2)(ii): Unstable objects shall not be used to support scaffolds or platform units.    a. 75 Glenwild Rd, Madison, NJ - Front of house in the west side of driveway    Tubular framed scaffold was missing base plates and employer used paving stones on dirt to level the scaffold, thereby exposing employees to fall hazards.         Violation observed on or about May 19, 2012
Recent events (1)
  • · Z (S) $0

1926.451 E01

Serious Gravity 1 1 instance 3 exposed
Issued
Jun 1, 2012
Penalty
Initial $1,200 · Current $1,200
29 CFR 1926.451(e)(1): When scaffold platforms are more than 2 feet (0.6 m) above or below a point of access, portable ladders, hook-on ladders, attachable ladders, stair towers (scaffold stairways/towers), stairway-type ladders (such as ladder stands), ramps, walkways, integral prefabricated scaffold access, or direct access from another scaffold, structure, personnel hoist, or similar surface shall be used. Crossbraces shall not be used as a means of access.    a. 75 Glenwild Rd, Madison, NJ - Front of house in the west side of driveway    Employees did not use proper access or egress from scaffold platform, thereby exposing employees to fall hazards.             Violation observed on or about May 19, 2012
Recent events (1)
  • · Z (S) $1200

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 334355518.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.