VIRGINIA BEACH, VA ·
OSHA Inspection: AMSEC
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of AMSEC in 2829 GUARDIAN LANE, VIRGINIA BEACH, VA 23452 (NAICS 336611). OSHA activity number 334371713.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- AMSEC
- Site address
- 2829 GUARDIAN LANE
- City
- VIRGINIA BEACH
- State
- VA
- ZIP
- 23452
- Mailing
- 2829 GUARDIAN LANE, VIRGINIA BEACH, VA 23452
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 336611
- Employees
- 365
- Ownership type
- A
Citations
4 citations on file for this inspection.
1910.212 A03 II
- Issued
- Jun 5, 2012
- Penalty
- Initial $3,190 · Current $3,190
General-duty citation text
29 CFR 1910.212(a)(3)(ii): Point(s) of operation of machinery were not guarded to prevent employee(s) from having any part of their body in the danger zone(s) during operating cycle(s): a). Woodlake Fabrication Shop: On or about 05/11/12, the guard to the hole punch section of the Piranha-P70 Iron worker was missing thus exposing employees to a potential finger amputation.
Recent events (2)
- · I (S) $3190
- · Z (S) $3190
1910.215 B09
- Issued
- Jun 5, 2012
- Penalty
- Initial $2,550 · Current $0 Reduced
General-duty citation text
29 CFR 1910.215(b)(9): The distance between the abrasive wheel periphery(s) and the adjustable tongue or the end of the safety guard peripheral member at the top exceeded one fourth inch: a.) Woodlake Weld Shop: On or about 05/11/12, the tongue guards on the Dayton 6" bench mounted grinder MDL #42672F were not adjusted properly in that both tongue guards were adjusted to 3/4" from the abrasive wheels.
Recent events (2)
- · I (S) $0
- · Z (S) $2550
1910.134 I05 III
- Issued
- Jun 5, 2012
- Abate by
- Jul 5, 2012
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.134(i)(5)(iii) as referenced by 1915.154: Sorbent beds and filters were not maintained and replaced or refurbished periodically following the manufacturer's instructions: a.) Woodlake Blast Booth: On or about 05/14/12, the sorbent beds and filters in the blasters breathing air system were not replaced every 400 hours of operation or every three months in accordance with the manufacturer's instructions.
Recent events (2)
- · I (O) $0
- · Z (O) $0
1910.134 I06
- Issued
- Jun 5, 2012
- Abate by
- Jul 5, 2012
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.134(i)(6) as referenced by 1915.154: The employer did not ensure that compressors that were not oil-lubricated did not have carbon monoxide levels in the breathing air in excess of 10 parts per million (ppm): a.) Woodlake Blast Booth: On or about 05/14/12, the employer did not ensure that carbon monoxide in the breathing air did not exceed 10 parts per million; in that, the CO monitor was not calibrated monthly as per manufacturer's instruction.
Recent events (2)
- · I (O) $0
- · Z (O) $0
More inspections at Amsec
View Amsec's full OSHA safety record →
More inspections in this industry (NAICS 336611)
More inspections in VA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 334371713.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.