LAKELAND, FL ·
OSHA Inspection: SOUTHERN MILLING & LUMBER, INC.
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of SOUTHERN MILLING & LUMBER, INC. in 1508 GEORGE JENKINS BLVD., LAKELAND, FL 33802 (NAICS 321920). OSHA activity number 334373511.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- SOUTHERN MILLING & LUMBER, INC.
- Site address
- 1508 GEORGE JENKINS BLVD.
- City
- LAKELAND
- State
- FL
- ZIP
- 33802
- Mailing
- 1508 GEORGE JENKINS BLVD., LAKELAND, FL 33802
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- Non-union (B)
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 321920
- Employees
- 70
- Ownership type
- Private (A)
Citations
5 citations on file for this inspection.
1910.37 B02
- Issued
- Jun 26, 2012
- Abate by
- Jul 11, 2012
- Penalty
- Initial $2,700 · Current $1,080 Reduced
General-duty citation text
29 CFR 1910.37(b)(2): Each exit was not clearly visible and marked by a sign reading "Exit": a) On or about 5/14/12 in the main office of the facility exits were not marked by signs that read "Exit."
Recent events (2)
- · I (S) $1080
- · Z (S) $2700
1910.147 C04 II
- Issued
- Jun 26, 2012
- Abate by
- Aug 8, 2012
- Penalty
- Initial $4,500 · Current $1,800 Reduced
General-duty citation text
29 CFR 1910.147(c)(4)(ii): The energy control procedures did not clearly and specifically outline the scope, purpose, authorization, rules, and techniques to be utilized for the control of hazardous energy, including, but not limited to Items of this sec a) On or about 5/14/12 at 1508 George Jenkins Blvd, Lakeland, FL the employer did not have specific lockout/tagout procedures for equipment such as but not limited to Holtec, Baker 1, Baker 2, Trim Line Saw and Viking Pallet Machine.
Recent events (2)
- · I (S) $1800
- · Z (S) $4500
1910.212 A01
- Issued
- Jun 26, 2012
- Abate by
- Jul 11, 2012
- Penalty
- Initial $4,500 · Current $1,800 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: a) On or about 5/14/12 in Warehouse 2 at the Holtec transcut saw the interlock on the safety gate was not operational. An employee opened the safety gate to observe the cutting while the saw was in operation.
Recent events (2)
- · I (S) $1800
- · Z (S) $4500
1910.141 A03
- Issued
- Jun 26, 2012
- Abate by
- Jul 11, 2012
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.141(a)(3)(i): All places of employment were not kept clean to the extent that the nature of the work allowed: a) On or about 5/14/12 in the Warehouse 1 break room area
Recent events (2)
- · I (O) $0
- · Z (O) $0
1910.303 G01 II
- Issued
- Jun 26, 2012
- Abate by
- Jul 11, 2012
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.303(g)(1)(ii): The required working space about electric equipment rated 600 volts, nominal, or less to ground, was used for storage: a) On or about 5/14/12 in Warehouse 2 electrical access to an electrical panel was blocked by two bicycles. b) On or about 5/14/12 in the Mill and Pallet shop access to an electrical panel was blocked by a rolling floor fan.
Recent events (2)
- · I (O) $0
- · Z (O) $0
More inspections at Southern Milling & Lumber, INC.
View Southern Milling & Lumber, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 321920)
More inspections in FL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 334373511.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.