Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: STEPHEN GAMBLE, INC.

Federal Agency inspection · Safety discipline

On , OSHA opened a federal Agency safety inspection of STEPHEN GAMBLE, INC. in 840 PARK AVE. APT 3A, NEW YORK, NY 10075 (NAICS 238350). OSHA activity number 334450533.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Stephen Gamble, INC. — free Get an email when a new federal OSHA severe-injury report for Stephen Gamble, INC. is published. One employer, no account, unsubscribe in one click.
Site address
840 PARK AVE. APT 3A
City
NEW YORK
State
NY
ZIP
10075
Mailing
5 LEWIS COURT, GREENWICH, CT 06830
Inspection type
Federal Agency (M)
Scope
Complete (A)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238350
Employees
4
Ownership type
A

7 citations on file for this inspection.

1926.20 B02

Serious Gravity 5 1 instance 4 exposed
Issued
Nov 20, 2012
Abate by
Dec 10, 2012
Penalty
Initial $3,500 · Current $3,500
29 CFR 1926.20(b)(2): The employer did not initiate and maintain a safety program which provides for frequent and regular inspections of jobsites, materials, and equipment to be made by a competent person (i.e., a person who is capable of identifying existing hazards.)    a) Jobsite, Apartment 3A:    The employer did not initiate and maintain a safety program which provides for frequent and regular inspections of jobsites, materials, and equipment to be made by a competent person. Employees were exposed to hazards, including but not limited to: working on a window sill and adjacent to a window opening on the 3rd floor without fall protection. On or about 05/24/12.    NOTE:  IN ADDITION TO CERTIFICATION OF ABATEMENT, THE EMPLOYER IS REQUIRED TO SUBMIT DOCUMENTATION OF ABATEMENT FOR THIS ITEM.  FAILURE TO COMPLY MAY RESULT IN AN ADDITIONAL PENALTY OF $1,000 AS PER 29 CFR 1903.19.
Recent events (1)
  • — Z (S) $3500

1926.501 B14

Serious Gravity 10 1 instance 1 exposed
Issued
Nov 20, 2012
Abate by
Dec 3, 2012
Penalty
Initial $4,900 · Current $4,900
29 CFR 1926.501(b)(14): Each employee working on, at, above, or near wall openings (including those with chutes attached), where the outside bottom edge of the wall opening was 6 feet (1.8 m) or more above lower levels and the inside bottom edge of the wall opening is less than 39 inches (1.0 M) above the walking/working surface, is not protected from falling by the use of a guardrail system, a safety net system, or a personal fall arrest system.    a) Apartment 3A, in library room, southwest side:    An employee was standing on a window sill and working adjacent to a window/wall opening. The outside bottom edge of the opening is about 30 feet above ground. The inside of the opening had a decorative rail installed, which the top edge height is 27 inches above the sill. The employee was exposed to a fall hazard while working, and was fatally injured when he fell over the rail and down 30 feet to ground in an accident. On or about 05/24/12.    NOTE:  IN ADDITION TO CERTIFICATION OF ABATEMENT, THE EMPLOYER IS REQUIRED TO SUBMIT DOCUMENTATION OF ABATEMENT FOR THIS ITEM.  FAILURE TO COMPLY MAY RESULT IN AN ADDITIONAL PENALTY OF $1,000 AS PER 29 CFR 1903.19.
Recent events (1)
  • — Z (S) $4900

1926.502 B01

Serious Gravity 5 1 instance 1 exposed
Issued
Nov 20, 2012
Abate by
Dec 3, 2012
Penalty
Initial $3,500 · Current $3,500
29 CFR 1926.502(b)(1): The top edge height of the top rails, or equivalent guardrail system members, was not 42 inches (1.1 m) plus or minus 3 inches (8 cm) above the walking/working level.  Note:  When employees are using stilts, the top edge height of the top rail, or equivalent member, shall be increased an amount equal to the height of the stilts.    a) Apartment 3A, in library room, southwest side:    An employee was standing on a window sill and working adjacent to a window opening. The window opening had a decorative window rail installed, which the top edge height is 27 inches above the sill. The employee was exposed to a fall hazard while working, and was fatally injured when he fell over the rail and down 30 feet to ground in an accident. On or about 05/24/12.    NOTE:  IN ADDITION TO CERTIFICATION OF ABATEMENT, THE EMPLOYER IS REQUIRED TO SUBMIT DOCUMENTATION OF ABATEMENT FOR THIS ITEM.  FAILURE TO COMPLY MAY RESULT IN AN ADDITIONAL PENALTY OF $1,000 AS PER 29 CFR 1903.19.
Recent events (1)
  • — Z (S) $3500

1926.503 A01

Serious Gravity 5 1 instance 3 exposed
Issued
Nov 20, 2012
Abate by
Dec 10, 2012
Penalty
Initial $3,500 · Current $3,500
29 CFR 1926.503(a)(1): The employer shall provide a training program for each employee who might be exposed to fall hazards. The program shall enable each employee to recognize the hazards of falling and shall train each employee in the procedures to be followed in order to minimize these hazards.    a) Jobsite:    The employer did not provide fall protection training to employees who were exposed to fall hazards, including but not limited to: working on a window sill and adjacent to a window opening on the 3rd floor without fall protection. On or about 05/24/12.    NOTE:  IN ADDITION TO CERTIFICATION OF ABATEMENT, THE EMPLOYER IS REQUIRED TO SUBMIT DOCUMENTATION OF ABATEMENT FOR THIS ITEM.  FAILURE TO COMPLY MAY RESULT IN AN ADDITIONAL PENALTY OF $1,000 AS PER 29 CFR 1903.19.
Recent events (1)
  • — Z (S) $3500

1910.1200 E01

Other-than-serious 1 instance 4 exposed
Issued
Nov 20, 2012
Abate by
Dec 17, 2012
Penalty
Initial $0 · Current $0
29 CFR 1910.1200(e)(1): Employers did not develop, implement, and maintain at each workplace, a written hazard communication program which at least describes how the criteria specified in paragraphs (f), (g), and (h) of this section for labels and other forms of warning, safety data sheets, and employee information and training will be met.    a) Jobsite:    The employer did not develop a written hazard communication program for employees who used wood finish, lacquer, paint stripper, varnish, paint, and wax. On or about 05/24/12.    NOTE:  IN ADDITION TO CERTIFICATION OF ABATEMENT, THE EMPLOYER IS REQUIRED TO SUBMIT DOCUMENTATION OF ABATEMENT FOR THIS ITEM.  FAILURE TO COMPLY MAY RESULT IN AN ADDITIONAL PENALTY OF $1,000 AS PER 29 CFR 1903.19.
Recent events (1)
  • — Z (O) $0

1910.1200 G01

Other-than-serious 1 instance 4 exposed
Issued
Nov 20, 2012
Abate by
Dec 17, 2012
Penalty
Initial $0 · Current $0
29 CFR 1910.1200(g)(1): Employers did not have a safety data sheet in the workplace for each hazardous chemical which they use. (Construction Reference: 1926.59)    a) Jobsite:    The employer did not have material safety data sheets for wood finish, lacquer, paint stripper, varnish, paint, and wax that were used by employees during work. On or about 05/24/12.    NOTE:  IN ADDITION TO CERTIFICATION OF ABATEMENT, THE EMPLOYER IS REQUIRED TO SUBMIT DOCUMENTATION OF ABATEMENT FOR THIS ITEM.  FAILURE TO COMPLY MAY RESULT IN AN ADDITIONAL PENALTY OF $1,000 AS PER 29 CFR 1903.19.
Recent events (1)
  • — Z (O) $0

1910.1200 H01

Other-than-serious 1 instance 4 exposed
Issued
Nov 20, 2012
Abate by
Dec 17, 2012
Penalty
Initial $0 · Current $0
29 CFR 1910.1200(h)(1): Employees were not provided effective information and training on hazardous chemicals in their work area at the time of their initial assignment and whenever a new hazard that the employees had not been previously trained about was introduced into their work area: (Construction Reference: 1926.59)    a) Jobsite:    The employer did not provide employees with information or training regarding the hazards associated with wood finish, lacquer, paint stripper, varnish, paint, and wax that were used by employees during work. On or about 05/24/12.    NOTE:  IN ADDITION TO CERTIFICATION OF ABATEMENT, THE EMPLOYER IS REQUIRED TO SUBMIT DOCUMENTATION OF ABATEMENT FOR THIS ITEM.  FAILURE TO COMPLY MAY RESULT IN AN ADDITIONAL PENALTY OF $1,000 AS PER 29 CFR 1903.19.
Recent events (1)
  • — Z (O) $0

View Stephen Gamble, INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 334450533.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.