MOSCOW, ID ·
OSHA Inspection: EDA ELECTRIC
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of EDA ELECTRIC in HWY 95 AND D STREET, MOSCOW, ID 83843 (NAICS 238210). OSHA activity number 334451135.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- EDA ELECTRIC
- Site address
- HWY 95 AND D STREET
- City
- MOSCOW
- State
- ID
- ZIP
- 83843
- Mailing
- 943 SW MIES STREET, PULLMAN, WA 99163
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- Non-union (B)
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238210
- Employees
- 4
- Ownership type
- Private (A)
Citations
3 citations on file for this inspection.
1926.403 I02 I
- Issued
- Jun 21, 2012
- Abate by
- Jul 13, 2012
- Penalty
- Initial $1,600 · Current $0 Reduced
General-duty citation text
29 CFR 1926.403(i)(2)(i): Live parts of electric equipment operating at 50 volts or more were not guarded against accidental contact by cabinets or other forms of enclosures, nor by any of the means listed in subparagraphs (A) through (D) of this paragraph. (a) Main floor of the building, on or about May 17, 2012, and at times prior thereto, as the creating employer, EDA Electric did not protect its employees and other unqualified site workers, in that they were not restricted from entering the area around an energized 240 volt power panel. (b) Main floor of the building, on or about May 17, 2012, and at times prior thereto, as the creating employer, EDA Electric did not protect its employees and other unqualified site workers, in that they were not restricted from entering the area around an energized 120 volt lighting panel. (c) West side of the second floor of the building, on or about May 17, 2012, and at times prior thereto, as the creating employer, EDA Electric did not protect its employees and other unqualified site workers, in that they were not restricted from entering the area around the energized power panel (120V) with a cardboard cover labeled "Hot! Stay Out! (d) East side of the second floor of the building, on or about May 17, 2012, and at times prior thereto, as the creating employer, EDA Electric did not protect its employees and other unqualified site workers, in that they were not restricted from entering the area around the energized power panel (120V) with a cardboard cover labeled "Hot! Stay Out! Note: Abatement certification is required for this item.
Recent events (2)
- · I (S) $0
- · Z (S) $1600
1926.405 D
- Issued
- Jun 21, 2012
- Abate by
- Jul 13, 2012
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.405(d): Panelboards mounted in cabinets, cutout boxes or enclosures designed for the purpose were not dead front: (a) Main floor of the building, on or about May 17, 2012, and at times prior thereto, as the creating employer, EDA Electric did not protect its employees and other unqualified site workers, in that they were not restricted from entering the area around an energized 240 volt power panel. (b) Main floor of the building, on or about May 17, 2012, and at times prior thereto, as the creating employer, EDA Electric did not protect its employees and other unqualified site workers, in that they were not restricted from entering the area around an energized 120 volt lighting panel. (c) West side of the second floor of the building, on or about May 17, 2012, and at times prior thereto, as the creating employer, EDA Electric did not protect its employees and other unqualified site workers, in that they were not restricted from entering the area around the energized power panel (120V) with a cardboard cover labeled "Hot! Stay Out! (d) East side of the second floor of the building, on or about May 17, 2012, and at times prior thereto, as the creating employer, EDA Electric did not protect its employees and other unqualified site workers, in that they were not restricted from entering the area around the energized power panel (120V) with a cardboard cover labeled "Hot! Stay Out! Note: Abatement certification is required for this item.
Recent events (2)
- · I (S) $0
- · Z (S) $0
1926.403 B02
- Issued
- Jun 21, 2012
- Abate by
- Jul 13, 2012
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.403(b)(2): Listed, labeled, or certified equipment was not installed and used in accordance with instructions included in the listing, labeling, or certification: (a) Main floor of the building, on or about May 17, 2012, and at times prior thereto, as the exposing employer, EDA Electric did not prevent employees from using a four-way power supply, for charging batteries and for power, that did not meet the electrical code. Note: Abatement certification is required for this item.
Recent events (2)
- · I (O) $0
- · Z (O) $0
More inspections at EDA Electric
View EDA Electric's full OSHA safety record →
More inspections in this industry (NAICS 238210)
More inspections in ID
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 334451135.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.