Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: PATRIOT COMPANIES

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of PATRIOT COMPANIES in 2200 BUFFALO ROAD, ROCHESTER, NY 14624 (NAICS 236220). OSHA activity number 334497757.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Patriot Companies — free Get an email when a new federal OSHA severe-injury report for Patriot Companies is published. One employer, no account, unsubscribe in one click.
Establishment
PATRIOT COMPANIES
Site address
2200 BUFFALO ROAD
City
ROCHESTER
State
NY
ZIP
14624
Mailing
620 PARK AVENUE #185, ROCHESTER, NY 14607
Inspection type
Planned (H)
Scope
Complete (A)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
236220
Employees
2
Ownership type
A

3 citations on file for this inspection.

1926.150 C01 IV

Serious Gravity 1 1 instance 6 exposed
Issued
Jul 6, 2012
Penalty
Initial $1,200 · Current $900 Reduced
29 CFR 1926.150(c)(1)(iv):     One or more fire extinguishers, rated not less than 2A, shall be provided on each floor. In multistory buildings, at least one fire extinguisher shall be located adjacent to stairway.      (a)  On or about 05/22/12, at the former Tut's Villa restaurant, under renovation, located on 2200 Buffalo Road, in Rochester, New York, fire extilnguishers were not available on site during construction.    NO ABATEMENT CERTIFIICATION REQUIRED
Recent events (2)
  • — I (S) $900
  • — Z (S) $1200

1926.300 A

Serious Gravity 1 1 instance 1 exposed
Issued
Jul 6, 2012
Penalty
Initial $1,200 · Current $900 Reduced
29 CFR 1926.300(a):     Condition of tools. All hand and power tools and similar equipment, whether furnished by the employer or the employee, shall be maintained in a safe condition.      On or about 05/22/12, at the former Tuts Villa Restaurant, (under renovation) located on 2200 Buffalo Road, in Rochester, New York, a table saw (RIGID  Model TS2400-1), was defective.  The ground pin had been broken off the corded plug.    NO ABATEMENT CERTIFICATION REQUIRED
Recent events (2)
  • — I (S) $900
  • — Z (S) $1200

1926.304 I01

Serious Gravity 5 1 instance 1 exposed
Issued
Jul 6, 2012
Penalty
Initial $1,700 · Current $1,275 Reduced
29 CFR 1926.304(i)(1):     Each circular hand-fed ripsaw shall be guarded by a hood which shall completely enclose the portion of the saw above the table and that portion of the saw above the material being cut. The hood and mounting shall be arranged so that the hood will automatically adjust itself to the thickness of and remain in contact with the material being cut but it shall not offer any considerable resistance to insertion of material to saw or to passage of the material being sawed. The hood shall be made of adequate strength to resist blows and strains incidental to reasonable operation, adjusting, and handling, and shall be so designed as to protect the operator from flying splinters and broken saw teeth. It shall be made of material that is soft enough so that it will be unlikely cause tooth breakage. the hood shall be so mounted as to insure that its operation will be positive, reliable, and in true alignment with the saw; and the mounting shall be adequate in strength to resist any reasonable side thrust or other force tending to throw it out of line.  [58 FR 35175, June 30, 1993; 61 FR 9227, March 7, 1996]        On or about 05/22/12, at the former Tut's Villa Restaurant, (under renovation) located on 2200 Buffalo Road, in Rochester, New York, a table saw (RIGID  Model TS2400-1), had been used without a hood guard on the saw blade to guard against accidental contact with the blade.    NO ABATEMENT CERTIFICATION REQUIRED
Recent events (2)
  • — I (S) $1275
  • — Z (S) $1700

View Patriot Companies's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 334497757.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.