Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,195,903Inspections Most recent open 2026-08-18 Last loaded 2026-08-21

OSHA Inspection: SCHULZE AND BURCH BISCUIT COMPANY

Complaint inspection · Safety discipline

On , OSHA opened a complaint safety inspection of SCHULZE AND BURCH BISCUIT COMPANY in 1133 WEST 35 STREET, CHICAGO, IL 60609 (NAICS 311811). OSHA activity number 334499944.

What this inspection record means

OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Schulze and Burch Biscuit Company for free Get an email when a new federal OSHA severe-injury report for Schulze and Burch Biscuit Company is published. One employer, no account, unsubscribe in one click.
Site address
1133 WEST 35 STREET
City
CHICAGO
State
IL
ZIP
60609
Mailing
1133 WEST 35 STREET, CHICAGO, IL 60609
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
Union (A)
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
311811
Employees
350
Ownership type
Private (A)

3 citations on file for this inspection.

5(a)(1)

Serious Gravity 5 9 instances 4 exposed
Issued
Jul 27, 2012
Penalty
Initial $4,400 · Current $3,080 Reduced
OSH ACT of 1970 Section (5)(a)(1):     The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to struck by hazards, electrical hazards and crush hazards.      a.   Icing Department - On or about May 30, 2012, the pendant control boxes on the overhead hoist on line #2 and line #3 were not labeled, thereby exposing employees to crush type injuries.    b.  Icing Department - On or about May 30, 2012, the pendant control box on the overhead hoist on line #2 were not constructed to prevent accidental contact with electrical components, thereby exposing employees to electrical type injuries    c.  Icing Department - On or about May 30, 2012, the employer had not performed a frequent inspection on the overhead hoist, serial #LW242LB on line #2, and overhead hoist, serial # LW0315NR on line #3, thereby exposing employees to struck by hazards.    d.  Icing Department - On or about May 30, 2012, the employer had not performed a periodic inspection on the overhead hoist, serial #LW242LB on line #2, and overhead hoist, serial # LW0315NR on line #3, thereby exposing employees to struck by hazards.    e. Icing Department - On or about May 30, 2012, the employer had not performed inspections on the hooks on each of the overhead hoists on line #2 and line #3, thereby exposing employees to struck by hazards.
Recent events (2)
  • · I (S) $3080
  • · Z (S) $4400

1910.184 D

Serious Gravity 5 2 instances 4 exposed
Issued
Jul 27, 2012
Penalty
Initial $4,400 · Current $3,080 Reduced
29 CFR 1910.184(d):     Inspections. Each day before being used, the sling and all fastenings and attachments shall be inspected for damage or defects by a competent person designated by the employer. Additional inspections shall be performed during sling use, where service conditions warrant. Damaged or defective slings shall be immediately removed from service.    a.  Icing Department - On or about May 30, 2012, the employer had not performed inspections on slings and attachments, thereby exposing employees to struck by hazards.
Recent events (2)
  • · I (S) $3080
  • · Z (S) $4400

1910.184 I01

Serious Gravity 5 2 instances 4 exposed
Issued
Jul 27, 2012
Abate by
Aug 3, 2012
Penalty
Initial $0 · Current $0
29 CFR 1910.184(i)(1):     Sling identification. Each sling shall be marked or coded to show the rated capacities for each type of hitch and type of synthetic web material.    a.  Icing Department - On or about May 30, 2012, the sling used to move the icing rollers located on line #2 and line #3 did not identify the rated weight capacities it was capable of handling, thereby exposing employees to struck by hazards.
Recent events (2)
  • · I (S) $0
  • · Z (S) $0

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 334499944.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.