SOLOMONS, MD ·
OSHA Inspection: WASHBURNS BOATYARD, INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of WASHBURNS BOATYARD, INC. in 14250 DOWELL ROAD, SOLOMONS, MD 20688 (NAICS 713930). OSHA activity number 334511045.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- WASHBURNS BOATYARD, INC.
- Site address
- 14250 DOWELL ROAD
- City
- SOLOMONS
- State
- MD
- ZIP
- 20688
- Mailing
- 14250 DOWELL ROAD, SOLOMONS, MD 20688
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- Non-union (B)
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 713930
- Employees
- 18
- Ownership type
- Private (A)
Citations
7 citations on file for this inspection.
1910.134 E01
- Issued
- Aug 15, 2012
- Abate by
- Sep 14, 2012
- Penalty
- Initial $1,200 · Current $1,000 Reduced
General-duty citation text
29 CFR 1910.134(e)(1): The employer did not provide a medical evaluation to determine the employees ability to use a respirator, before the employee was fit tested or required to use the respirator in the workplace: a) Prep Room - Employees were wearing respirators including a 3M face dual cartridge and a 3M half face dual cartridge respirator during bottom paint sanding operations, and a medical evaluation was not provided, on or about 05/30/2012. ABATEMENT CERTIFICATION REQUIRED
Recent events (2)
- · I (S) $1000
- · Z (S) $1200
1910.134 F
- Issued
- Aug 15, 2012
- Abate by
- Sep 14, 2012
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.134(f): The employee was required to use a respirator without being fit tested with the same make, model, style and size of respirator that was to be used: a) Throughout Yard - Employees were wearing respirators including a 3M face dual cartridge and a 3M half face dual cartridge respirator during bottom paint sanding operations, and fit testing was not provided, on or about 05/30/2012. ABATEMENT CERTIFICATION REQUIRED
Recent events (2)
- · I (S) $0
- · Z (S) $0
1910.213 C01
- Issued
- Aug 15, 2012
- Abate by
- Aug 16, 2012
- Penalty
- Initial $1,600 · Current $0 Reduced
General-duty citation text
29 CFR 1910.213(c)(1): Circular handfed ripsaw(s) were not guarded by an automatically adjusting hood which completely enclosed that portion of the saw above the table and above the material being cut: a) Carpentry Shop - A carpenter was using a Delta Unisaw table saw to rip wood lumber stock, and not using the provided hood guard, on or about 05/30/2012. ABATMEMENT CERTIFICATION REQUIRED
Recent events (2)
- · I (S) $0
- · Z (S) $1600
1910.213 C02
- Issued
- Aug 15, 2012
- Abate by
- Aug 16, 2012
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.213(c)(2): Hand-fed circular ripsaw(s) were not furnished with a spreader to prevent material from squeezing the saw or being thrown back on the operator: a) Carpenter Shop - A carpenter was using a Delta Unisaw table saw to cut wood lumber stock and a spreader was not used, on or about 05/30/2012. ABATEMENT CERTIFICATION REQUIRED
Recent events (2)
- · I (S) $0
- · Z (S) $0
1910.213 C03
- Issued
- Aug 15, 2012
- Abate by
- Aug 16, 2012
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.213(c)(3): Hand-fed ripsaw(s) did not have non kickback fingers or dogs so located as to oppose the thrust or tendency of the saw to pick up the material or to throw it back toward the operator: a) Carpenter Shop - A carpenter was using a Delta Unisaw table saw to cut wood lumber stock and an anti kick back device was not used, on or about 05/30/2012. ABATEMENT CERTIFICATION REQUIRED
Recent events (2)
- · I (S) $0
- · Z (S) $0
1910.305 A02 IX
- Issued
- Aug 15, 2012
- Abate by
- Aug 25, 2012
- Penalty
- Initial $1,200 · Current $1,000 Reduced
General-duty citation text
29 CFR 1910.305(a)(2)(ix): Lamps for general illumination were not protected from accidental contact or breakage by a suitable fixture or lampholder with a guard: a) Carpenter Shop - A florescent light fixture with two tubes was located directly above a Delta table saw, and the tubes were not protected from damage, on or about 05/30/2012. ABATEMENT CERTIFICATION REQUIRED
Recent events (2)
- · I (S) $1000
- · Z (S) $1200
1910.305 G02 III
- Issued
- Aug 15, 2012
- Abate by
- Aug 20, 2012
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.305(g)(2)(iii): Flexible cords and cables were not connected to devices and fittings so that strain relief was provided that would prevent pull from being directly transmitted to joints or terminal screws: a) Carpenter Shop - The outer insulation of a Deltal sander, model number DOF52336, power cord was separated approximately two inches from its strain relief. The sander was plugged into a 110 volt, 15 amp service, on or about 05/30/2012. ABATEMENT CERTIFICATION REQUIRED
Recent events (2)
- · I (S) $0
- · Z (S) $0
More inspections in this industry (NAICS 713930)
More inspections in MD
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 334511045.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.