WICHITA, KS —
OSHA Inspection: CREASON CORRUGATING AND MACHINERY CO INC
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of CREASON CORRUGATING AND MACHINERY CO INC in 5836 N. BROADWAY, WICHITA, KS 67219 (NAICS 332710). OSHA activity number 334513819.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- CREASON CORRUGATING AND MACHINERY CO INC
- Site address
- 5836 N. BROADWAY
- City
- WICHITA
- State
- KS
- ZIP
- 67219
- Mailing
- 5844 N BROADWAY ST, WICHITA, KS 67219
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332710
- Employees
- 20
- Ownership type
- A
Citations
4 citations on file for this inspection.
1910.212 A03 II
- Issued
- Nov 6, 2012
- Abate by
- Dec 4, 2012
- Penalty
- Initial $1,440 · Current $1,008 Reduced
General-duty citation text
29 CFR 1910.212(a)(3)(ii): Point(s) of operation of machinery were not guarded to prevent employee(s) from having any part of their body in the danger zone(s) during operating cycle(s): At the job site, 5836 N. Broadway, Wichita, Kansas, employees were operating the following machine lathes without the chuck being guarded. Employees were exposed to hazards associated with rotating parts. (a) LeBlong Lathe (b) Birmingham Lathe
Recent events (2)
- — I (S) $1008
- — Z (S) $1440
1910.219 D01
- Issued
- Nov 6, 2012
- Abate by
- Dec 4, 2012
- Penalty
- Initial $1,800 · Current $1,260 Reduced
General-duty citation text
29 CFR 1910.219(d)(1): Pulley(s) with part(s) seven feet or less from the floor or work platform were not guarded in accordance with the requirements specified in 29 CFR 1910.219(m) and (o): At the job site, 5844 N. Broadway, employees working near the drive pulley for the Build Up Lathe were exposed to in-going nip point hazards with the lower and upper pulley drives not guarded.
Recent events (2)
- — I (S) $1260
- — Z (S) $1800
1910.219 E01 I
- Issued
- Nov 6, 2012
- Abate by
- Dec 4, 2012
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.219(e)(1)(i): Horizontal belts which had both runs seven feet or less from the floor level were not guarded with a guard that extended to at least fifteen inches above the belt: At the job site, 5844 N. Broadway, Wichita, Kansas, employees work near the unguarded drive belts for the Build Up Lathe. Employees were exposed to in-going nip point hazards with the lower and upper drive belts not guarded.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.147 C04 I
- Issued
- Nov 6, 2012
- Abate by
- Dec 4, 2012
- Penalty
- Initial $1,800 · Current $1,260 Reduced
General-duty citation text
29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section: At the job site, 5844 N. Broadway, Wichita, Kansas, the employer had not developed written specific Lockout Tagout procedures for the control of hazardous energy. Employees were exposed to reenergization and unexpected start-up for the following machines: (a) Machine shop compressor. (b) Le Blond Lathe. (c) Birmingham Lathe. (d) Build Up Lathe. (e) SMJW Wet OD grinder
Recent events (2)
- — I (S) $1260
- — Z (S) $1800
More inspections at Creason Corrugating and Machinery CO INC
View Creason Corrugating and Machinery CO INC's full OSHA safety record →
More inspections in this industry (NAICS 332710)
More inspections in KS
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 334513819.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.