Safety Incidents OSHA Severe Injury Reports · 2015–2025
3,913,242Inspections Most recent open 2026-07-13 Last loaded 2026-07-17

OSHA Inspection: ROBINSON ROOFING & SHEET METAL, INC.

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of ROBINSON ROOFING & SHEET METAL, INC. in 508 E. MAIN, CASEY, IL 62420 (NAICS 238160). OSHA activity number 334565132.

Watch Robinson Roofing & Sheet Metal, INC. — free Get an email when a new federal OSHA severe-injury report for Robinson Roofing & Sheet Metal, INC. is published. One employer, no account, unsubscribe in one click.
Site address
508 E. MAIN
City
CASEY
State
IL
ZIP
62420
Mailing
605 E. MARKET, SUITE C, SOMONAUK, IL 60552
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238160
Employees
2
Ownership type
A

2 citations on file for this inspection.

1926.501 B13

Serious Gravity 10 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $2800.00 · Current $1200.00 Reduced
29 CFR 1926.501(b)(13):     "Residential construction." Each employee engaged in residential construction activities 6 feet (1.8 m) or more above lower levels shall be protected by guardrail systems, safety net system, or personal fall arrest system unless another provision in paragraph (b) of this section provides for an alternative fall protection measure. Exception: When the employer can demonstrate that it is infeasible or creates a greater hazard to use these systems, the employer shall develop and implement a fall protection plan which meets the requirements of paragraph (k) of 1926.502.  Note: There is a presumption that it is feasible and will not create a greater hazard to implement at least one of the above-listed fall protection systems. Accordingly, the employer has the burden of establishing that it is appropriate to implement a fall protection plan which complies with 1926.502(k) for a particular workplace situation, in lieu of implementing any of those systems.    Robinson Roofing & Sheet Metal, Inc. had an employee exposed to 10.5 ft. fall hazards without fall protection, on a residential construction site in Casey, Illinois.
Recent events (2)
  • — I (S) $1200
  • — Z (S) $2800

1926.1053 B01

Serious Gravity 5 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $2000.00 · Current $0.00 Reduced
29 CFR 1926.1053(b)(1):     When portable ladders are used for access to an upper landing surface, the ladder side rails shall extend at least 3 feet (.9 m) above the upper landing surface to which the ladder is used to gain access; or, when such an extension is not possible because of the ladder's length, then the ladder shall be secured at its top to a rigid support that will not deflect, and a grasping device, such as a grabrail, shall be provided to assist employees in mounting and dismounting the ladder. In no case shall the extension be such that ladder deflection under a load would, by itself, cause the ladder to slip off its support.    Robinson Roofing & Sheet Metal, Inc. had an employee exposed to 10.5 ft. fall hazards, while accessing and exiting the roof via an extension ladder that only extended 1 ft. above the upper landing surface of the roof, on a residential construction site in Casey, Illinois.
Recent events (2)
  • — I (S) $0
  • — Z (S) $2000

View ROBINSON ROOFING & SHEET METAL, INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 334565132.