PALMYRA, MO ·
OSHA Inspection: CONTINENTAL CASTING
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of CONTINENTAL CASTING in 7063 COUNTY RD. 328, PALMYRA, MO 63461 (NAICS 331521). OSHA activity number 334598935.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- CONTINENTAL CASTING
- Site address
- 7063 COUNTY RD. 328
- City
- PALMYRA
- State
- MO
- ZIP
- 63461
- Mailing
- 801 2ND ST., MONROE CITY, MO 63456
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- Non-union (B)
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 331521
- Employees
- 100
- Ownership type
- Private (A)
Citations
5 citations on file for this inspection.
1910.303 B01 IV
- Issued
- Jul 11, 2012
- Penalty
- Initial $1,951 · Current $1,366 Reduced
General-duty citation text
29 CFR 1910.303(b)(1)(iv): Electric equipment was not free from recognized hazards that were likely to cause serious physical harm to employees, such as damaged electrical insualtion: a. The outer insulation of the power cord to the front cover of the Prince diecast machine (model 528) was damaged. b. The power cord to a pipe cutter was damaged.
Recent events (2)
- · I (S) $1365.53
- · Z (S) $1950.75
1910.303 G02 I
- Issued
- Jul 11, 2012
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.303(g)(2)(i): Except as elsewhere required or permitted by Subpart S of Part 1910, live parts of electric equipment operating at 50 volts or more were not guarded against accidental contact by use of approved cabinets or other forms of approved enclosures or by any of the means identified in paragraphs (A), (B), (C), and (D) of 29 CFR 1910.303(g)(2)(i): a. The cover to the control panel, on the Prince diecast machine, which was powered on at the time of the inspection, was left open (arc flash hazard noted on the cover).
Recent events (2)
- · I (S) $0
- · Z (S) $0
1910.305 G02 III
- Issued
- Jul 11, 2012
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.305(g)(2)(iii): Flexible cords were not connected to devices and fittings so that tension would not be transmitted to joints or terminal screws: a. Insulation to the power cord plug to the parts washer was pulled loose.
Recent events (2)
- · I (S) $0
- · Z (S) $0
1910.95 I05
- Issued
- Jul 11, 2012
- Abate by
- Aug 22, 2012
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.95(i)(5): The employer did not ensure proper initial fitting and supervise the correct use of all hearing protectors: a. During the inspection, a few instances were observed where employees had not fully inserted hearing protection in company required hearing protection areas. Abatement documentation is required for this violation.
Recent events (2)
- · I (O) $0
- · Z (O) $0
1910.1200 H
- Issued
- Jul 11, 2012
- Abate by
- Aug 22, 2012
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.1200(h): Employees were not provided effective information and training as specified in 29 CFR 1910.1200(h)(1) and -2 on hazardous chemicals in their work area at the time of their initial assignment and whenever a new hazard was introduced: a. At least some employees were not trained at the time of their hire on chemical hazard communication. Abatement documentation is required for this violation.
Recent events (2)
- · I (O) $0
- · Z (O) $0
More inspections at Continental Casting
View Continental Casting's full OSHA safety record →
More inspections in this industry (NAICS 331521)
More inspections in MO
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 334598935.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.