Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: DESIGN CONSTRUCTION

Complaint inspection · Safety discipline

On , OSHA opened a complaint safety inspection of DESIGN CONSTRUCTION in 6020 SW 10TH AVE., TOPEKA, KS 66615 (NAICS 238140). OSHA activity number 334601549.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Design Construction — free Get an email when a new federal OSHA severe-injury report for Design Construction is published. One employer, no account, unsubscribe in one click.
Establishment
DESIGN CONSTRUCTION
Site address
6020 SW 10TH AVE.
City
TOPEKA
State
KS
ZIP
66615
Mailing
270 COUGAR TERRACE, HOT SPRINGS, AR 71913
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238140
Employees
7
Ownership type
A

3 citations on file for this inspection.

1926.451 C03

Serious Gravity 10 1 instance 2 exposed
Issued
Nov 9, 2012
Abate by
Dec 7, 2012
Penalty
Initial $2,800 · Current $560 Reduced
29 CFR 1926.451(c)(3):   Supported scaffold poles, legs, post, frames, and/or uprights were not plumb and braced to prevent swaying and displacement:     At the job site, 6020 SW 10th Ave, Topeka, Kansas, employees were working from the welded framed scaffold that was not braced on the inside near the building.  Employees were exposed to fall hazards of approximately 30 feet to the ground.
Recent events (2)
  • — I (S) $560
  • — Z (S) $2800

1926.451 G04 IV

Serious Gravity 10 1 instance 1 exposed
Issued
Nov 9, 2012
Abate by
Dec 7, 2012
Penalty
Initial $2,800 · Current $560 Reduced
29 CFR 1926.451(g)(4)(iv):  Midrails were not installed at a height approximately midway between the top edge of the guardrail system and the platform surface:    At the job site, 6020 SW 10th Ave, Topeka, Kansas, employees were working from the steel framed scaffold without midrails installed at the working level.  Employees were exposed to fall hazards of approximately 20 feet to the ground.
Recent events (2)
  • — I (S) $560
  • — Z (S) $2800

1926.501 B01

Serious Gravity 5 1 instance 1 exposed
Issued
Nov 9, 2012
Abate by
Dec 7, 2012
Penalty
Initial $2,000 · Current $400 Reduced
29 CFR 1926.501(b)(1):   "Unprotected sides and edges." Each employee on a walking/working surface (horizontal and vertical surface) with an unprotected side or edge which is 6 feet (1.8 m) or more above a lower level shall be protected from falling by the use of guardrail systems, safety net systems, or personal fall arrest systems.    At the job site, 6020 SW 10th Ave, Topeka, Kansas, employee was doing work from the roof area and was not protected from fall hazards.  Employee was exposed to fall hazard of approximatley 9 feet to the ground.
Recent events (2)
  • — I (S) $400
  • — Z (S) $2000

View Design Construction's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 334601549.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.