Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: OZARK MOUNTAIN POULTRY, INC.

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of OZARK MOUNTAIN POULTRY, INC. in 750 WEST EASY STREET, ROGERS, AR 72757 (NAICS 311615). OSHA activity number 334615341.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Ozark Mountain Poultry, INC. — free Get an email when a new federal OSHA severe-injury report for Ozark Mountain Poultry, INC. is published. One employer, no account, unsubscribe in one click.
Site address
750 WEST EASY STREET
City
ROGERS
State
AR
ZIP
72757
Mailing
750 WEST EASY STREET, ROGERS, AR 72757
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
311615
Employees
435
Ownership type
A

5 citations on file for this inspection.

1910.147 C05 II D

Serious Gravity 10 2 instances 10 exposed
Issued
Oct 5, 2012
Abate by
Oct 15, 2012
Penalty
Initial $7,000 · Current $4,200 Reduced
29 CFR 1910.147(c)(5)(ii)(D):     Lockout devices and tagout devices did not indicate the identity of the employee applying the device(s)      On or about June 6, 2012, and at times prior thereto, at the job site located at 750 W Easy St in Rogers, Arkansas, where employees were sanitizing chicken processing equipment. Lock out devices did not indicate the identity of the authorized employee who locked out the equipment. This practice exposed employees to caught in and amputation hazards in the following:    a) The debone line    b)The keyed guard area
Recent events (2)
  • — I (S) $4200
  • — Z (S) $7000

1910.147 C06 I

Serious Gravity 10 1 instance 10 exposed
Issued
Oct 5, 2012
Abate by
Oct 15, 2012
Penalty
Initial $0 · Current $0
29 CFR 1910.147(c)(6)(i):     The employer did not conduct a periodic inspection of the energy control procedure at least annually to ensure that the procedure and the requirement of this standard were being followed:        On or about June 6, 2012, at the Ozark Mountain Poultry plant located at 750 W Easy St in Rogers, Arkansas. The employer did not conduct a periodic inspection of the energy control procedure. This practice exposed employees to caught in and amputation hazards.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.212 A03 II

Serious Gravity 5 1 instance 2 exposed
Issued
Oct 5, 2012
Abate by
Nov 20, 2012
Penalty
Initial $4,250 · Current $2,550 Reduced
29 CFR 1910.212(a)(3)(ii):     Point(s) of operation of machinery were not guarded to prevent employee(s) from having any part of their body in the danger zone(s) during operating cycle(s):      On or about June 6, 2012, and at times prior thereto, on the JRL line of the Ozark Mountain Poultry facility located at 750 W Easy St in Rogers, Arkansas. The point of operation on a meat saw was not guarded.
Recent events (2)
  • — I (S) $2550
  • — Z (S) $4250

1910.219 C04 I

Serious Gravity 10 1 instance 6 exposed
Issued
Oct 5, 2012
Abate by
Nov 20, 2012
Penalty
Initial $7,000 · Current $4,200 Reduced
29 CFR 1910.219(c)(4)(i):     Unguarded projecting shaft end(s) did not present a smooth edge and end and projected more than one half the diameter of the shaft:      On or about June 6, 2012, at the vacuum seal conveyor in the Ozark Mountain Poultry Plant located at 750 w Easy St in Rogers, Arkansas.  An un-guarded shaft end projected more than one half the diameter of the shaft.
Recent events (2)
  • — I (S) $4200
  • — Z (S) $7000

1910.219 F03

Serious Gravity 10 3 instances 6 exposed
Issued
Oct 5, 2012
Abate by
Nov 20, 2012
Penalty
Initial $0 · Current $0
29 CFR 1910.219(f)(3):     Sprocket wheels and chains which were seven -7 feet or less above floors or platforms were not enclosed:      Drive sprockets and chains less than 7 feet above the floor were not enclosed. This exposed employees to the hazard of being caught in and amputation hazards in the following locations:    a)	The JRL line    b)	The cone line    c)	The vacuum seal conveyor
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

View Ozark Mountain Poultry, INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 334615341.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.