Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,197,549Inspections Most recent open 2026-08-27 Last loaded 2026-08-31

OSHA Inspection: RANALDI BUILDERS INC.

Complaint inspection · Safety discipline

On , OSHA opened a complaint safety inspection of RANALDI BUILDERS INC. in SMITH POINT ROAD, ALTON BAY, NH 03810 (NAICS 236116). OSHA activity number 334662806.

What this inspection record means

OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Ranaldi Builders INC. for free Get an email when a new federal OSHA severe-injury report for Ranaldi Builders INC. is published. One employer, no account, unsubscribe in one click.
Site address
SMITH POINT ROAD
City
ALTON BAY
State
NH
ZIP
03810
Mailing
PO BOX 430, CENTER BARNSTEAD, NH 03225
Inspection type
Complaint (B)
Scope
Complete (A)
Discipline
Safety
Advance notice
No
Union status
Non-union (B)
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
236116
Employees
2
Ownership type
Private (A)

7 citations on file for this inspection.

1926.20 B02

Serious Gravity 5 1 instance 2 exposed
Issued
Sep 10, 2012
Abate by
Sep 11, 2012
Penalty
Initial $2,000 · Current $2,000
29 CFR 1926.20(b)(2): Programs did not provide for frequent and regular inspections of the job sites, materials, and equipment to be made by competent persons designated by the employers:    a. Site- Employees were exposed to fall and scaffold collapse hazards where a competent person did not conduct frequent and regular inspections of the jobsite, materials, and equipment.
Recent events (2)
  • · I (S) $2000
  • · Z (S) $2000

1926.451 A06

Serious Gravity 5 1 instance 2 exposed
Issued
Sep 10, 2012
Abate by
Sep 11, 2012
Penalty
Initial $0 · Current $0
29 CFR 1926.451(a)(6): Scaffolds were not designed by a qualified person:    a. Site- Employees were exposed to scaffold collapse hazards where the employer provided non scaffold grade lumber, which was not graded by a recognized lumber grading association, to be utilized as scaffold work platforms and the spans between the platform supports were up to approximately 13 feet.
Recent events (2)
  • · I (S) $0
  • · Z (S) $0

1926.451 G01

Serious Gravity 10 1 instance 2 exposed
Issued
Sep 10, 2012
Abate by
Sep 11, 2012
Penalty
Initial $2,800 · Current $0 Reduced
29 CFR 1926.451(g)(1): Employees on scaffolds more than 10 feet (3.1 m) above a lower level were not protected from falling to that lower level by fall protection established in paragraphs (g)(1)(i)-(vii) of this section:    a. Site- Employees working from carpenter bracket scaffolding were exposed to falls of up to 15 feet where fall protection was not used or provided.
Recent events (2)
  • · I (S) $0
  • · Z (S) $2800

1926.501 B13

Serious Gravity 10 1 instance 2 exposed
Issued
Sep 10, 2012
Abate by
Sep 11, 2012
Penalty
Initial $0 · Current $0
29 CFR 1926.501(b)(13): Employee(s) engaged in residential construction activities 6 feet (1.8 m) or more above lower levels were not protected by guardrail systems, safety net system, or personal fall arrest system:    a. Site- Employees were exposed to falls of up to approximately 19 feet from unprotected roof edges, floor edges, floor holes, and window openings where fall protection was not used or provided.
Recent events (2)
  • · I (S) $0
  • · Z (S) $0

1926.1052 C01 II

Serious Gravity 5 1 instance 2 exposed
Issued
Sep 10, 2012
Abate by
Sep 11, 2012
Penalty
Initial $0 · Current $0
29 CFR 1926.1052(c)(1)(ii): Stairways having four or more risers or rising more than 30 inches (76 cm), whichever was less, were not equipped with one stairrail system along each unprotected side or edge:    a. Loft- Employees accessing the loft were exposed to falls of approximately 14 feet where a stairrail system was not installed along the unprotected sides of the stairway.
Recent events (2)
  • · I (S) $0
  • · Z (S) $0

1926.454 A

Serious Gravity 5 1 instance 2 exposed
Issued
Sep 10, 2012
Abate by
Sep 24, 2012
Penalty
Initial $2,000 · Current $0 Reduced
29 CFR 1926.454(a): The employer did not have each employee who performed work while on a scaffold trained by a person qualified in the subject matter to recognize the hazards associated with the type of scaffold being used and to understand the procedures to control or minimize those hazards:    a. Site- Employees who were exposed to fall and scaffold collapse hazards while working from carpenter bracket scaffolds were not provided with scaffold training from the employer.
Recent events (2)
  • · I (S) $0
  • · Z (S) $2000

1926.503 A01

Serious Gravity 5 1 instance 2 exposed
Issued
Sep 10, 2012
Abate by
Sep 24, 2012
Penalty
Initial $0 · Current $0
29 CFR 1926.503(a)(1): The employer did not provide a training program for each employee potentially exposed to fall hazards to enable each employee to recognize the hazards of falling and the procedures to be followed in order to minimize these hazards:    a. Site- Employees who were exposed to falls were not provided with fall protection training from the employer.
Recent events (2)
  • · I (S) $0
  • · Z (S) $0

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 334662806.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.