GREENWICH, CT ·
OSHA Inspection: BUD CONSTRUCTION INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of BUD CONSTRUCTION INC. in 338 WEST PUTNAM AVENUE, GREENWICH, CT 06830 (NAICS 238140). OSHA activity number 334765195.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- BUD CONSTRUCTION INC.
- Site address
- 338 WEST PUTNAM AVENUE
- City
- GREENWICH
- State
- CT
- ZIP
- 06830
- Mailing
- 22 FIRST STREET 3RD FLOOR, STAMFORD, CT 06905
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- Non-union (B)
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238140
- Employees
- 4
- Ownership type
- Private (A)
Citations
6 citations on file for this inspection.
1910.178 L01 I
- Issued
- Sep 19, 2012
- Abate by
- Sep 26, 2012
- Penalty
- Initial $2,000 · Current $2,000
General-duty citation text
29 CFR 1910.178(l)(1)(i): The employer shall ensure that each powered industrial truck operator is competent to operate a powered industrial truck safely, as demonstrated by the successful completion of the training and evaluation specified in this paragraph (l). WORKSITE: The employee authorized and allowed to operate the Lull Highlander model 644B-37 rough terrain forklift, had not received training in the safe operation of the powered industrial truck.
Recent events (3)
- · A (S) $2000
- · I (S) $1000
- · Z (S) $2000
1926.451 C02 IV
- Issued
- Sep 19, 2012
- Abate by
- Sep 24, 2012
- Penalty
- Initial $2,800 · Current $2,800
General-duty citation text
29 CFR 1926.451(c)(2)(iv): Front-end loaders and similar pieces of equipment shall not be used to support scaffold platforms unless they have been specifically designed by the manufacturer for such use. WORKSITE: The Lull Highlander model 644B-37 rough terrain forklift, not designed by the manufacturer to support scaffold platforms, was used to elevate and support a pallet/ platform while an employee was laying concrete block approximately 17 feet above the ground.
Recent events (3)
- · A (S) $2800
- · I (S) $1400
- · Z (S) $2800
1926.451 C02 V
- Issued
- Sep 19, 2012
- Abate by
- Sep 24, 2012
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.451(c)(2)(v): Fork-lifts shall not be used to support scaffold platforms unless the entire platform is attached to the fork and the fork-lift is not moved horizontally while the platform is occupied. WORKSITE: The scaffold platform from which an employee, laying concrete block approximately 17 feet above the ground was not secured to the forks of the Lull Highlander model 644B-37 rough terrain forklift truck.
Recent events (3)
- · A (S) $0
- · I (S) $0
- · Z (S) $0
1926.451 G01 VII
- Issued
- Sep 19, 2012
- Abate by
- Sep 24, 2012
- Penalty
- Initial $2,800 · Current $2,800
General-duty citation text
29 CFR 1926.451(g)(1)(vii): For all scaffolds not otherwise specified in paragraphs (g)(1)(i) through (g)(1)(vi) of this section, each employee shall be protected by the use of personal fall arrest systems or guardrail systems meeting the requirements of paragraph (g)(4) of this section. WORKSITE: The employee laying concrete block from an elevated work platform, 17 feet above the ground was not protected from falling by use of personal fall arrest and/or guardrail systems.
Recent events (3)
- · A (S) $2800
- · I (S) $1400
- · Z (S) $2800
1926.454 A
- Issued
- Sep 19, 2012
- Abate by
- Sep 26, 2012
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.454(a): The employer shall have each employee who performs work while on a scaffold trained by a person qualified in the subject matter to recognize the hazards associated with the type of scaffold being used and to understand the procedures to control or minimize those hazards. The training shall include the following areas, as applicable: WORKSITE: The employee laying concrete block from an elevated work platform approximately 17 feet above the ground was not provided with training in the recognition of hazards associated with the type of scaffold being used, or the procedures necessary to eliminate or minimize those hazards.
Recent events (3)
- · A (S) $0
- · I (S) $0
- · Z (S) $0
1926.602 C01 VI
- Issued
- Sep 19, 2012
- Abate by
- Sep 24, 2012
- Penalty
- Initial $2,000 · Current $2,000
General-duty citation text
29 CFR 1926.602(c)(1)(vi): All industrial trucks in use shall meet the applicable requirements of design, construction, stability, inspection, testing, maintenance, and operation, as defined in American National Standards Institute B56.1-1969, Safety Standards for Powered Industrial Trucks. WORKSITE: The operator of the Lull Highlander model 644B-37 rough terrain forklift truck was not positioned at or near the controller of the truck at all times while the work platform, supported on the forks of the truck and from which an employee was laying concrete block approximately 17 feet to the ground.
Recent events (3)
- · A (S) $2000
- · I (S) $1000
- · Z (S) $2000
More inspections in this industry (NAICS 238140)
More inspections in CT
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 334765195.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.