Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,192,068Inspections Most recent open 2026-08-04 Last loaded 2026-08-07

OSHA Inspection: TRUMP EQUIPMENT CO INC

Complaint inspection · Safety discipline

On , OSHA opened a complaint safety inspection of TRUMP EQUIPMENT CO INC in 4941 EMIL STREET, SAN ANTONIO, TX 78219 (NAICS 532120). OSHA activity number 334807989.

What this inspection record means

OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Trump Equipment CO INC for free Get an email when a new federal OSHA severe-injury report for Trump Equipment CO INC is published. One employer, no account, unsubscribe in one click.
Site address
4941 EMIL STREET
City
SAN ANTONIO
State
TX
ZIP
78219
Mailing
4941 EMIL STREET, SAN ANTONIO, TX 78219
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
532120
Employees
26
Ownership type
A

5 citations on file for this inspection.

1910.178 L01 II

Serious Gravity 5 1 instance 1 exposed
Issued
Sep 18, 2012
Abate by
Oct 3, 2012
Penalty
Initial $2,800 · Current $1,680 Reduced
29 CFR 1910.178(l)(1)(ii)    The employer did not ensure that each operator had successfully completed the training required by paragraph (l), except as permitted by paragraph (l)(5), prior to permitting an employee to operate a power industrial truck:    On or about 06/07/12, and at times prior thereto, an employee was exposed to stuck-by hazard while operating a forklift without being trained.
Recent events (2)
  • · I (S) $1680
  • · Z (S) $2800

1910.178 L06

Serious Gravity 5 1 instance 1 exposed
Issued
Sep 18, 2012
Abate by
Oct 3, 2012
Penalty
Initial $0 · Current $0
29 CFR 1910.178(l)(6):     The employer did not certify that each operator has been trained and evaluated as required by this paragraph (l). The certification shall include the name of the operator, the date of the training, the date of the evaluation, and the identity of the person(s) performing the training or evaluation:    On or about 06/07/12, and at times prior thereto, an employee was exposed to stuck-by hazard while operating a forklift without being evaluated and certified by his current employer.
Recent events (2)
  • · I (S) $0
  • · Z (S) $0

1910.215 A01

Serious Gravity 5 1 instance 1 exposed
Issued
Sep 18, 2012
Abate by
Oct 3, 2012
Penalty
Initial $2,800 · Current $1,680 Reduced
29 CFR 1910.215(a)(1):     Abrasive wheel(s) used on grinding machinery were not used with safety guards(s):    On or about 06/07/12, and at times prior thereto, an employee was exposed to a struck-by hazard while operating a portable 4 1/2" Dewalt Angle grinder, Model DW 818, without the peripheral guard in place.
Recent events (2)
  • · I (S) $1680
  • · Z (S) $2800

1910.253 B04 III

Serious Gravity 5 15 instances 10 exposed
Issued
Sep 18, 2012
Abate by
Oct 3, 2012
Penalty
Initial $2,800 · Current $1,680 Reduced
29 CFR 1910.253(b)(4)(iii):     Oxygen cylinders in storage were not separated from fuel-gas cylinders or combustible materials (especially oil or grease), a minimum distance of 20 feet:                  On or about 06/07/12, and at times prior thereto, an employee was exposed to a fire hazard while working near Oxygen compressed gas cylinders which were not separated from compressed fuel gas cylinders.
Recent events (2)
  • · I (S) $1680
  • · Z (S) $2800

1910.134 C01

Other-than-serious 1 instance 1 exposed
Issued
Sep 18, 2012
Abate by
Oct 18, 2012
Penalty
Initial $700 · Current $420 Reduced
29 CFR 1910.134(c)(1):     A written respiratory protection program that included the provisions in 1910.134(c)(1)(i) - (ix) with worksite specific procedures was not established and implemented for required respirator use:    On or about 06/07/12, and at times prior thereto, an employee was exposed to hazardous chemicals while performing work on a FRAC tank and wearing a respirator without the employer having a respiratory protection program.
Recent events (2)
  • · I (O) $420
  • · Z (O) $700

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 334807989.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.