Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,193,745Inspections Most recent open 2026-08-06 Last loaded 2026-08-10

OSHA Inspection: BOZEMAN GLASS

Complaint inspection · Safety discipline

On , OSHA opened a complaint safety inspection of BOZEMAN GLASS in 107 BRIDGER CENTER DRIVE, BOZEMAN, MT 59715 (NAICS 321911). OSHA activity number 334829389.

What this inspection record means

OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Bozeman Glass for free Get an email when a new federal OSHA severe-injury report for Bozeman Glass is published. One employer, no account, unsubscribe in one click.
Establishment
BOZEMAN GLASS
Site address
107 BRIDGER CENTER DRIVE
City
BOZEMAN
State
MT
ZIP
59715
Mailing
P.O. BOX 624, BOZEMAN, MT 59771
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
321911
Employees
8
Ownership type
A

5 citations on file for this inspection.

1910.178 L01 I

Serious Gravity 1 1 instance 2 exposed
Issued
Oct 29, 2012
Abate by
Nov 20, 2012
Penalty
Initial $1,200 · Current $100 Reduced
29 CFR 1910.178(l)(1)(i):     The employer did not ensure that each powered industrial truck operator was competent to operate a powered industrial truck safely, as demonstrated by the successful completion of the training and evaluation specified in this paragraph (l):    (a) Bozeman Glass:  On or about June 22, 2012 and at times prior thereto, employees were exposed to struck by hazards from operators that were not trained to operate a Nissan 30 model powered industrial truck.
Recent events (2)
  • · I (S) $100
  • · Z (S) $1200

1910.212 A01

Serious Gravity 5 1 instance 1 exposed
Issued
Oct 29, 2012
Abate by
Nov 5, 2012
Penalty
Initial $2,000 · Current $100 Reduced
29 CFR 1910.212(a)(1):     One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks:    (a) Shop area: On or about June 22, 2012 and at times prior thereto, employees were exposed to amputation hazards while cutting materials with an unguarded Delta model table saw.
Recent events (2)
  • · I (S) $100
  • · Z (S) $2000

1910.303 B02

Serious Gravity 5 1 instance 3 exposed
Issued
Oct 29, 2012
Abate by
Nov 5, 2012
Penalty
Initial $1,600 · Current $100 Reduced
29 CFR 1910.303(b)(2):     Listed or labeled electrical equipment was not used or installed in accordance with instructions included in the listing or labeling:    (a) Shop area:  On or about June 22, 2012 and at times prior thereto, employees were exposed to electrical shock hazards due to a four-way electrical box designed to be securely fastened to a building surface was hanging loose and used as an extension cord.
Recent events (2)
  • · I (S) $100
  • · Z (S) $1600

1910.305 G01 IV D

Serious Gravity 5 1 instance 3 exposed
Issued
Oct 29, 2012
Abate by
Nov 5, 2012
Penalty
Initial $0 · Current $0
29 CFR 1910.305(g)(1)(iv)(D):     Flexible cords and cables were attached to building surfaces:    (a) Shop area:  On or about June 22, 2012 and at times prior thereto, employees were exposed to electrical shock hazards due to a flexible cord attached to the wall of the building.
Recent events (2)
  • · I (S) $0
  • · Z (S) $0

1910.334 A02 II

Serious Gravity 5 1 instance 1 exposed
Issued
Oct 29, 2012
Abate by
Nov 5, 2012
Penalty
Initial $0 · Current $0
29 CFR 1910.334(a)(2)(ii):     There was a defect or evidence of damage that could have exposes an employee to injury and the defective or damaged item was not removed from service:    (a) Shop area:  On or about June 22, 2012 and at times prior thereto, employees were exposed to electrical shock hazards while operating a Delta model table saw with a damaged cord end.
Recent events (2)
  • · I (S) $0
  • · Z (S) $0

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 334829389.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.