Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,196,991Inspections Most recent open 2026-08-24 Last loaded 2026-08-27

OSHA Inspection: CAPLAN AUTOMOTIVE

Complaint inspection · Health discipline

On , OSHA opened a complaint health inspection of CAPLAN AUTOMOTIVE in 406 WARREN STREET, BEVERLY, NJ 08010 (NAICS 811111). OSHA activity number 334859584.

What this inspection record means

OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Caplan Automotive for free Get an email when a new federal OSHA severe-injury report for Caplan Automotive is published. One employer, no account, unsubscribe in one click.
Establishment
CAPLAN AUTOMOTIVE
Site address
406 WARREN STREET
City
BEVERLY
State
NJ
ZIP
08010
Mailing
406 WARREN STREET, BEVERLY, NJ 08010
Inspection type
Complaint (B)
Scope
Complete (A)
Discipline
Health
Advance notice
No
Union status
Non-union (B)
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
811111
Employees
5
Ownership type
Private (A)

4 citations on file for this inspection.

1910.151 B

Other-than-serious 1 instance 3 exposed
Issued
Sep 26, 2012
Penalty
Initial $0 · Current $0
29 CFR 1910.151(b):     First aid supplies approved by a consulting physician were not readily available:    a) Throughout the facility: The employer did not provide employees with a first aid kit in the event of a non emergent injury/illness to employees.
Recent events (1)
  • · Z (O) $0

1910.1200 E01

Other-than-serious 1 instance 5 exposed
Issued
Sep 26, 2012
Abate by
Oct 18, 2012
Penalty
Initial $0 · Current $0
29 CFR 1910.1200(e)(1):     The employer did not develop, implement, and/or maintain at the workplace a written hazard communication program which describes how the criteria specified in 29 CFR 1910.1200(f), (g), and (h) will be met:      a) Worksite specific: On or about 06/27/2012, the employer did not develop, implement nor maintain a written hazard communication program for a workplace where hazardous chemicals such as, but not limited to Sure Klean Detergent 600 and Spray Nine Cleaner Degreaser were used by employees.           NOTE: THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT CERTIFICATION FOR THIS ITEM. FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 IN ACCORDANCE WITH 29 CFR 1903.19.
Recent events (1)
  • · Z (O) $0

1910.1200 G01

Other-than-serious 1 instance 5 exposed
Issued
Sep 26, 2012
Abate by
Oct 18, 2012
Penalty
Initial $0 · Current $0
29 CFR 1910.1200(g)(1):     The employer did not have a material safety data sheet for each hazardous chemical in use:    a) Repair Bay: On or about 06/27/2012, the employer did not have a material safety data sheet for hazardous chemicals such as, but not limited to Spray Nine Cleaner Degreaser, Johnson's Multi-Purpose Silicone Lubricant and Ultra Black Silicone Gasket Maker; that were in use at the facility.-      NOTE: THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT CERTIFICATION FOR THIS ITEM. FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 IN ACCORDANCE WITH 29 CFR 1903.19.
Recent events (1)
  • · Z (O) $0

1910.1200 H01

Other-than-serious 1 instance 5 exposed
Issued
Sep 26, 2012
Abate by
Oct 18, 2012
Penalty
Initial $0 · Current $0
29 CFR 1910.1200(h)(1):     Employees were not provided effective information and training on hazardous chemicals in their work area at the time of their initial assignment and whenever a new hazard that the employees had not been previously trained about was introduced into their work area:    a) Worksite specific: On or about 06/27/2012, the employer did not provide hazard communication training to employees working with hazardous chemicals such as, but not limited to Spray Nine Cleaner Degreaser, Johnson's Multi-purpose Silicone Lubricant and Ultra Black Silicone Gasket Maker in the facility.      NOTE: THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT CERTIFICATION FOR THIS ITEM. FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 IN ACCORDANCE WITH 29 CFR 1903.19.
Recent events (1)
  • · Z (O) $0

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 334859584.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.