BUCKHANNON, WV ·
OSHA Inspection: C & J GASFIELD SERVICES, INC.
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of C & J GASFIELD SERVICES, INC. in 61 FIFTH STREET, BUCKHANNON, WV 26201 (NAICS 213112). OSHA activity number 334885183.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- C & J GASFIELD SERVICES, INC.
- Site address
- 61 FIFTH STREET
- City
- BUCKHANNON
- State
- WV
- ZIP
- 26201
- Mailing
- P.O. BOX 638, CLINTWOOD, VA 24228
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- Non-union (B)
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 213112
- Employees
- 27
- Ownership type
- Private (A)
Citations
5 citations on file for this inspection.
1910.133 A01
- Issued
- Nov 16, 2012
- Abate by
- Nov 29, 2012
- Penalty
- Initial $2,800 · Current $2,800
General-duty citation text
29 CFR 1910.133(a)(1): The employer did not ensure that each affected employee uses appropriate eye or face protection when exposed to eye or face hazards from flying particles, molten metal, liquid chemicals, acids or caustic liquids, chemical gases or vapors, or potentially injurious light radiation: (a) Shop area: Employees were exposed to flying debris while servicing single piece rim wheels. Employees were not using appropriate eye or face protection such as face shields goggles or safety glasses, as determined on June 22, 2012. Abatement Certification required for this item.
Recent events (1)
- · Z (S) $2800
1910.177 D04 I
- Issued
- Nov 16, 2012
- Abate by
- Nov 29, 2012
- Penalty
- Initial $2,800 · Current $2,800
General-duty citation text
29 CFR 1910.177(d)(4)(i): The employer did not furnish and assure that an air line assembly consisting of a clip-on chuck was used for inflating tires: (a) Shop area: Employees serviced single piece rim wheels for large vehicles. Employees were exposed to flying debris while inflating the tire with an air line that was not equipped with a clip-on chuck, as determined on June 22, 2012. Abatement Certification required for this item.
Recent events (1)
- · Z (S) $2800
1910.177 D04 II
- Issued
- Nov 16, 2012
- Abate by
- Nov 29, 2012
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.177(d)(4)(ii): The employer did not furnish and assure that an air line assembly consisting of an in-line valve with a pressure gauge or a presettable regulator was used for inflating tires: (a) Shop area: Employees serviced single piece rim wheels for large vehicles. Employees were exposed to flying debris while inflating and checking tire pressure with an air line that was not equipped with an inline valve or presettable regulator, as determined on June 22, 2012. Abatement Certification required for this item.
Recent events (1)
- · Z (S) $0
1910.177 D04 III
- Issued
- Nov 16, 2012
- Abate by
- Nov 29, 2012
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.177(d)(4)(iii): The employer did not furnish and assure that an air line assembly consisting of a sufficient length of hose between the clip-on chuck and the in-line valve (if one is used) to allow the employee to stand outside the trajectory was used for inflating tires: (a) Shop area: Employees serviced single piece rim wheels for large vehicles. Employees were exposed to flying debris while inflating the tire while using an air line that did not consist of a sufficient length of hose to allow the employee to stand outside of the trajectory, as determined on June 22, 2012. Abatement Certification required for this item.
Recent events (1)
- · Z (S) $0
1910.177 G08
- Issued
- Nov 16, 2012
- Abate by
- Nov 29, 2012
- Penalty
- Initial $2,800 · Current $2,800
General-duty citation text
29 CFR 1910.177(g)(8): The employer did not establish a safe operating procedure for servicing single piece rim wheels and did not ensure that employees were instructed and followed the procedure to stay out of the trajectory when inflating a tire on a single piece rim wheel: (a) Shop area: Employees used an air line equipped with a press on air chuck to service single piece rim wheels for large vehicles. Safe operating procedures were not established or followed to keep employees out of the trajectory while inflating tires, as determined on June 22, 2012. Abatement Certification required for this item.
Recent events (1)
- · Z (S) $2800
More inspections in this industry (NAICS 213112)
More inspections in WV
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 334885183.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.