Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: WOODS PLASTERING, INC

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of WOODS PLASTERING, INC in 2100 S. BRYANT BLVD., SAN ANGELO, TX 76905 (NAICS 238140). OSHA activity number 334966587.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Woods Plastering, INC — free Get an email when a new federal OSHA severe-injury report for Woods Plastering, INC is published. One employer, no account, unsubscribe in one click.
Site address
2100 S. BRYANT BLVD.
City
SAN ANGELO
State
TX
ZIP
76905
Mailing
1733 FM 584, SAN ANGELO, TX 76905
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238140
Employees
7
Ownership type
A

5 citations on file for this inspection.

1926.100 A

Serious Gravity 5 1 instance 4 exposed
Issued
Aug 13, 2012
Penalty
Initial $1,224 · Current $734 Reduced
29 CFR 1926.100(a): Employees working in areas where there was a possible danger of head injury from impact, or falling or flying objects, or from electrical shock and burns, were not protected by protective helmets:  On or about June 22, 2012 at the construction site where employees were going in and out of the building while other employees were working above them, exposing employees to the hazard of being struck by tools or materials.  Pursuant to 29 C.F.R. 1903.19, within ten (10) calendar days of the date of this citation, the employer must submit documentation showing that it is in compliance with the standard, including describing the steps that it is taking to ensure that employees working in areas where there is a possible danger of head injury from impact, or falling or flying objects, or from electrical shock and burns, are protected by protective helmets.
Recent events (2)
  • — I (S) $734.4
  • — Z (S) $1224

1926.451 B01

Serious Gravity 5 1 instance 2 exposed
Issued
Aug 13, 2012
Penalty
Initial $1,224 · Current $734 Reduced
29 CFR 1926.451(b)(1): Each platform on all working levels of scaffolds was not fully planked or decked between the front uprights and the guardrail supports as specified in paragraphs 1926.451(b)(1)(i)-(ii).  On or about June 22, 2012 at the construction site where employees were working from a welded frame scaffold which was not fully planked, exposing employees to the hazard of up to approximately 18 foot falls.  Pursuant to 29 C.F.R. 1903.19, within ten (10) calendar days of the date of this citation, the employer must submit documentation showing that it is in compliance with the standard, including describing the steps that it is taking to ensure that each platform on all working levels of scaffolds will be fully planked or decked between the front uprights and the guardrail supports as specified in paragraphs 1926.451(b)(1)(i)-(ii).
Recent events (2)
  • — I (S) $734.4
  • — Z (S) $1224

1926.451 B05 II

Serious Gravity 5 1 instance 2 exposed
Issued
Aug 13, 2012
Penalty
Initial $1,224 · Current $734 Reduced
29 CFR 1926.451(b)(5)(ii): The end of a platform greater than 10 feet in length extended over its support more than 18 inches and the platform was not designed and installed so that the cantilevered portion of the platform is able to support employees without tipping, or has guardrails which block employee access to the cantilevered end.  On or about June 22, 2012 at the construction site where employees were working from a welded frame scaffold up to approximately 18 feet high, which had the scaffold planks extended approximately 24 inches passed the end supports exposing employees to the hazard of an 18 foot fall.  Pursuant to 29 C.F.R. 1903.19, within ten (10) calendar days of the date of this citation, the employer must submit documentation showing that it is in compliance with the standard, including describing the steps that it is taking to ensure that each end of a platform greater than 10 feet in length is not extended over its support more than 18 inches and the platform is  designed and installed so that the cantilevered portion of the platform is able to support employees without tipping, or has guardrails which block employee access to the cantilevered end.
Recent events (2)
  • — I (S) $734.4
  • — Z (S) $1224

1926.451 E01

Serious Gravity 5 1 instance 2 exposed
Issued
Aug 13, 2012
Penalty
Initial $1,224 · Current $734 Reduced
29 CFR 1926.451(e)(1): When scaffold platforms were more than 2 feet (0.6 m) above or below a point of access, portable ladders, hook-on ladders, attachable ladders, stair towers (scaffold stairways/towers), stairway-type ladders (such as ladder stands), ramps, walkways, integral prefabricated scaffold access, or direct access from other scaffold, sturcture, personnel hoist, or similar surface was not used.  Crossbraces were used as a means of access.  On or about June 22, 2012 at the construction site where employees were applying stucco to the front of the building and using the scaffold frames and crossbracing for access and egress to and from the scaffold were not provided with a ladder, exposing employees to the hazard of an 18 foot fall.  Pursuant to 29 C.F.R. 1903.19, within ten (10) calendar days of the date of this citation, the employer must submit documentation showing that it is in compliance with the standard, including describing the steps that it is taking to ensure that when scaffold platforms are more than 2 feet (0.6 m) above or below a point of access, portable ladders, hook-on ladders, attachable ladders, stair towers (scaffold stairways/towers), stairway-type ladders (such as ladder stands), ramps, walkways, integral prefabricated scaffold access, or direct access from other scaffold, structure, personnel hoist, or similar surface is used.  Crossbraces are not to be used as a means of access.
Recent events (2)
  • — I (S) $734.4
  • — Z (S) $1224

1926.451 G04 I

Serious Gravity 5 1 instance 2 exposed
Issued
Aug 13, 2012
Penalty
Initial $1,224 · Current $734 Reduced
29 CFR 1926.451(g)(4)(i): Guardrail systems were not installed along all open sides and ends of platforms.  On or about June 22, 2012 at the construction site where employees were working on the top tier of the scaffold up to approximately 18 feet high, which was not provided with guard railing at the ends of the scaffold platform, exposing employees to the hazard of a 18 foot fall.  Pursuant to 29 C.F.R. 1903.19, within ten (10) calendar days of the date of this citation, the employer must submit documentation showing that it is in compliance with the standard, including describing the steps that it is taking to ensure that each guardrail systems are installed along all open sides and ends of platforms.
Recent events (2)
  • — I (S) $734.4
  • — Z (S) $1224

View Woods Plastering, INC's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 334966587.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.