BAY MINETTE, AL —
OSHA Inspection: CORROSION TECHNOLOGY, INC.
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of CORROSION TECHNOLOGY, INC. in 10955 HWY 138, BAY MINETTE, AL 36507 (NAICS 326122). OSHA activity number 334970183.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- CORROSION TECHNOLOGY, INC.
- Site address
- 10955 HWY 138
- City
- BAY MINETTE
- State
- AL
- ZIP
- 36507
- Mailing
- P.O. BOX 1326, BAY MINETTE, AL 36507
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 326122
- Employees
- 10
- Ownership type
- A
Citations
6 citations on file for this inspection.
5(a)(1)
- Issued
- Jul 10, 2012
- Penalty
- Initial $1,360 · Current $748 Reduced
General-duty citation text
OSH ACT of 1970 Section (5)(a)(1): The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to crush hazards while operating a forklift without a seatbelt: a) At Corrosion Technology: On or about June 29, 2012 and at times prior; the employer failed to ensure a Caterpillar 60 forklift on site had a working seatbelt exposing employees to crush hazards.
Recent events (2)
- — I (S) $748
- — Z (S) $1360
1910.178 P01
- Issued
- Jul 10, 2012
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.178(p)(1): Powered industrial truck(s) found to be in need of repair, defective, or in any way unsafe had not been taken out of service until restored to safe operating condition: a) At corrosion Technology: On or about June 29, 2012 and at times prior; the employer failed to take a Caterpillar 60 forklift out of service for items such as but not limited to a working horn exposing employees to struck-by hazards.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.178 L01 I
- Issued
- Jul 10, 2012
- Abate by
- Jul 31, 2012
- Penalty
- Initial $2,000 · Current $1,100 Reduced
General-duty citation text
29 CFR 1910.178(l)(1)(i): The employer did not ensure that each powered industrial truck operator was competent to operate a powered industrial truck safely, as demonstrated by the successful completion of the training and evaluation specified in this paragraph (l): a) At Corrosion Technology: On or about June 29, 2012 and at times prior; The employer allowed an employee to operate a powered industrial truck without the employer first ensuring the employee was competent to operate the equipment as demonstrated by the completion of the required training and evaluation specified in the regulation.
Recent events (2)
- — I (S) $1100
- — Z (S) $2000
1910.213 C01
- Issued
- Jul 10, 2012
- Penalty
- Initial $2,000 · Current $1,100 Reduced
General-duty citation text
29 CFR 1910.213(c)(1): Circular handfed ripsaw(s) were not guarded by an automatically adjusting hood which completely enclosed that portion of the saw above the table and above the material being cut: a) At Main Building: On or about June 29, 2012 and at times prior; the employer failed to ensure a Ryobi table saw used by employees had a guard installed exposing employees to amputation hazards.
Recent events (2)
- — I (S) $1100
- — Z (S) $2000
1910.305 B02
- Issued
- Jul 10, 2012
- Penalty
- Initial $1,360 · Current $748 Reduced
General-duty citation text
29 CFR 1910.305(b)(2): Pull boxes, junction boxes, and fittings were not provided with covers approved for the purpose: a) At Pipe Building: On or about June 29, 2012 and at times prior the employer failed to ensure the pipe roller kill switch had a cover installed to prevent employee contact with live wires exposing them to electrocution hazards. b) At Foreman Shed: On or about June 29, 2012 and at times prior the employer failed to ensure a light switch had a cover installed to prevent employee contact with live wires exposing them to electrocution hazards.
Recent events (2)
- — I (S) $748
- — Z (S) $1360
1910.145 C03
- Issued
- Jul 10, 2012
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.145(c)(3): Safety instruction signs. Safety instruction signs shall be used where there is a need for general instructions and suggestions relative to safety measures: a) At Corrosion Technology: On or about June 29, 2012 and at times prior:; the employer failed to tag out the cherry picker on site that is not to be used by employees.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at Corrosion Technology, INC.
View Corrosion Technology, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 326122)
More inspections in AL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 334970183.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.