KANSAS CITY, MO —
OSHA Inspection: WELD RACING, LLC
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of WELD RACING, LLC in 6600 STADIUM DRIVE, KANSAS CITY, MO 64129 (NAICS 336390). OSHA activity number 334990587.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- WELD RACING, LLC
- Site address
- 6600 STADIUM DRIVE
- City
- KANSAS CITY
- State
- MO
- ZIP
- 64129
- Mailing
- 6600 STADIUM DRIVE, KANSAS CITY, MO 64129
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 336390
- Employees
- 57
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.147 C04 I
- Issued
- Oct 10, 2012
- Abate by
- Oct 17, 2012
- Penalty
- Initial $1,785 · Current $892 Reduced
General-duty citation text
29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section: (a) On or about August 14, 2012, employees were exposed to possible injuries from powered machinery in that machine-specific lockout/tagout procedures had not been developed for all covered machines, including but not necesarily limited to, the Warner-Swassey lathe in the fabrication department.
Recent events (2)
- — I (S) $892
- — Z (S) $1785
1910.147 C06 I
- Issued
- Oct 10, 2012
- Abate by
- Oct 17, 2012
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(c)(6)(i): The employer did not conduct a periodic inspection of the energy control procedure at least annually to ensure that the procedure and the requirements of this standard were being followed: (a) On or about August 14, 2012, the employer had not conducted an annual review of their energy control procedures within the required time frame.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.212 A01
- Issued
- Oct 10, 2012
- Abate by
- Dec 14, 2012
- Penalty
- Initial $2,975 · Current $1,488 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and struck-by and entanglement hazards: (a) On or about August 14, 2012, employees in the heat treating and fabrication department were exposed to potential struck-by and entranglement hazards from the automated operation of a robotic material moving device whose operating area had not been effectively barricaded against worker entry.
Recent events (2)
- — I (S) $1488
- — Z (S) $2975
1910.304 B04 II B
- Issued
- Oct 10, 2012
- Abate by
- Oct 17, 2012
- Penalty
- Initial $2,975 · Current $0 Reduced
General-duty citation text
29 CFR 1910.304(b)(4)(ii)(B): Where connected to a branch circuit supplying two or more receptacles or outlets, a receptacle supplied a total cord and plug connected load in excess of the maximum specified in Table S-4 (12 amperes maximum load on a 15 ampere rated receptacle in a 15 to 20 ampere circuit): (a) On or about August 14, 2012, workers in the "assembly / clean and box" department were exposed to possible electrical shock and/or fire hazards while working in proximity to a temporary relocatable power tap (i.e., a common power strip) that had been plugged into a quad-plex receptacle outlet box creating a total of 9 outlets which were being used to power at least 6 electrical machines, appliances and/or devices.
Recent events (2)
- — I (S) $0
- — Z (S) $2975
1910.305 G01 IV A
- Issued
- Oct 10, 2012
- Abate by
- Oct 17, 2012
- Penalty
- Initial $2,975 · Current $1,338 Reduced
General-duty citation text
29 CFR 1910.305(g)(1)(iv)(A): Flexible cords and cables were used as a substitute for the fixed wiring of a structure: (a) On or about August 14, 2012, employees were exposed to possible electrical shock and/or fire hazards due to flexible cords and cables being used in lieu of fixed wiring to provide current to overhead lighting and a 220 Volt wheel balancing machine.
Recent events (2)
- — I (O) $1338
- — Z (S) $2975
More inspections at Weld Racing, LLC
View Weld Racing, LLC's full OSHA safety record →
More inspections in this industry (NAICS 336390)
More inspections in MO
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 334990587.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.