CHICAGO, IL ·
OSHA Inspection: PRODUCTION TOOL COMPANIES, LLC
Complaint inspection · Health discipline
At a glance
On , OSHA opened a complaint health inspection of PRODUCTION TOOL COMPANIES, LLC in 1229 E. 74TH STREET, CHICAGO, IL 60619 (NAICS 332710). OSHA activity number 335003984.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- PRODUCTION TOOL COMPANIES, LLC
- Site address
- 1229 E. 74TH STREET
- City
- CHICAGO
- State
- IL
- ZIP
- 60619
- Mailing
- 1229 E. 74TH STREET, CHICAGO, IL 60619
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Health
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332710
- Employees
- 46
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.22 A01
- Issued
- Aug 23, 2012
- Penalty
- Initial $1,785 · Current $1,250 Reduced
General-duty citation text
29 CFR 1910.22(a)(1): All places of employment, passageways, storerooms, and service rooms were not kept clean and orderly and in a sanitary condition: On or about July 3, 2012, in the facility, employee(s) required to perform metal fabrication operations were exposed to trip and fall hazards due to unprotected air hoses laying across floor passageways and across the top of the mezzanine ladder.
Recent events (2)
- · I (S) $1249.5
- · Z (S) $1785
1910.23 C01
- Issued
- Aug 23, 2012
- Penalty
- Initial $2,975 · Current $2,083 Reduced
General-duty citation text
29 CFR 1910.23(c)(1): Every open-sided floor or platform 4 feet or more above adjacent floor or ground level was not guarded by a standard railing (or the equivalent as specified in paragraph (e)(3) of this section) on all open sides except where there is entrance to a ramp, stairway, or fixed ladder: On or about July 3, 2012, in the facility, employee(s) required to perform metal fabrication operations were exposed to an approximate fall hazard of 6' above ground when working on top of Crawler Frames. Standard railings, or the equivalent, were not provided on all open sides.
Recent events (2)
- · I (S) $2082.5
- · Z (S) $2975
1910.252 B02 III
- Issued
- Aug 23, 2012
- Penalty
- Initial $1,785 · Current $1,250 Reduced
General-duty citation text
29 CFR 1910.252(b)(2)(iii): Workers or other persons adjacent to the welding areas were not protected from the rays by noncombustible or flameproof screens or shields or shall be required to wear appropriate goggles: On or about July 3, 2012, in the facility, workers or other persons adjacent to welding areas (i.e. respirator cabinet, mezzanine level) were not protected from the rays by noncombustible or flameproof screens or shields or required to wear appropriate goggles.
Recent events (2)
- · I (S) $1249.5
- · Z (S) $1785
1910.134 C02 II
- Issued
- Aug 23, 2012
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.134(c)(2)(ii): The employer did not establish and implement those elements of a written program necessary to ensure that any employee using a respirator voluntarily was medically able to use that respirator, and that the respirator was cleaned, stored and maintained so as not to create a health hazard to the user: On or about July 3, 2012, in the facility, employees required to perform welding operations were provided with half-mask air-purifying respirators. The employer did not establish and implement a written respiratory protection program to ensure that the respirator itself did not present a health hazard to the user.
Recent events (2)
- · I (O) $0
- · Z (O) $0
1910.178 L04 III
- Issued
- Aug 23, 2012
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.178(l)(4)(iii): An evaluation of each powered industrial truck operator's performance was not conducted at least once every three years: On or about July 3, 2012, in the facility, employees required to operate a forklift truck were not evaluated on performance at least once every three years.
Recent events (2)
- · I (O) $0
- · Z (O) $0
More inspections in this industry (NAICS 332710)
More inspections in IL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 335003984.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.