MIDDLETOWN, CT —
OSHA Inspection: PACIFIC MARBLE & GRANITE, LLC
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of PACIFIC MARBLE & GRANITE, LLC in 48 RAPALLO AVENUE, MIDDLETOWN, CT 06457 (NAICS 327991). OSHA activity number 335009189.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- PACIFIC MARBLE & GRANITE, LLC
- Site address
- 48 RAPALLO AVENUE
- City
- MIDDLETOWN
- State
- CT
- ZIP
- 06457
- Mailing
- 48 RAPALLO AVENUE, MIDDLETOWN, CT 06457
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 327991
- Employees
- 4
- Ownership type
- A
Citations
4 citations on file for this inspection.
1910.147 C04 I
- Issued
- Sep 20, 2012
- Abate by
- Dec 3, 2012
- Penalty
- Initial $2,800 · Current $1,400 Reduced
General-duty citation text
29 CFR 1910.147(c)(4)(i): Procedures shall be developed, documented and utilized for the control of potentially hazardous energy when employees are engaged in the activities covered by this section. WORKSHOP: The employer did not establish and implement written hazardous energy control procedures in the machine specific for the employees during servicing and maintenance of equipment, such as (but not limited to) the COCH C34 Bridge saw machine.
Recent events (2)
- — I (S) $1400
- — Z (S) $2800
1910.147 C07 I
- Issued
- Sep 20, 2012
- Abate by
- Dec 3, 2012
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(c)(7)(i): The employer shall provide training to ensure that the purpose and function of the energy control program are understood by employees and that the knowledge and skills required for the safe application, usage, and removal of the energy controls are acquired by employees. WORKSHOP: The employes, as authorized, affected and other types were not provided with training and information in the controlling of potentially hazardous and unexpected releases of revised energy sources (lo/to) during servicing and maintenance of equipment, such as (but not limited to) the COCH C34 Bridge saw machine.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.212 A01
- Issued
- Sep 20, 2012
- Abate by
- Dec 3, 2012
- Penalty
- Initial $2,800 · Current $1,400 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): Types of guarding. One or more methods of machine guarding shall be provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks. Examples of guarding methods are-barrier guards, two-hand tripping devices,electronic safety devices, etc. WORKSHOP: The lower portion of the saw blade of the COCH C34 Bridge saw machine was unguarded. On or about July 03, 2012, the right hand of an employee operating the COCH C34 Bridge Saw machine in the automatic mode to do straight cutting blue pearl 3CM polished slab marble/granite came in contact with the rotating saw blade and the employee sustained finger amputations to the hand from the incident.
Recent events (2)
- — I (S) $1400
- — Z (S) $2800
1910.219 C04 I
- Issued
- Sep 20, 2012
- Abate by
- Dec 3, 2012
- Penalty
- Initial $2,000 · Current $1,000 Reduced
General-duty citation text
29 CFR 1910.219(c)(4)(i): Unguarded projecting shaft end(s) did not present a smooth edge and end and projected more than one half the diameter of the shaft: WORKSHOP: The horizontal shaft end of the COCH C34 Bridge saw machine was unguarded.
Recent events (2)
- — I (S) $1000
- — Z (S) $2000
More inspections at Pacific Marble & Granite, LLC
View Pacific Marble & Granite, LLC's full OSHA safety record →
More inspections in this industry (NAICS 327991)
More inspections in CT
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 335009189.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.