OSHA Inspection: AMTC COMPANY

Issued

Dec 28, 2012

Abate by

Jan 4, 2013

Penalty

Initial $2,000 · Current $2,000

General-duty citation text

29 CFR 1926.451(g)(1)(vii): For all scaffolds not otherwise specified in paragraphs (g)(1)(i) through (g)(1)(vi) of this section, each employee was not protected by the use of personal fall arrest systems or guardrail systems meeting the requirements of paragraph (g)(4) of this section.    a) Jobsite - 1910 N. 18th Street - Employees working on the tubular welded frame scaffold were exposed to fall hazards of 13 feet up to 26 feet without the use of a guardrail system or personal fall arrest system.  Employees were working on the 3rd and 4thh levels of the scaffold on or about 6/29/12.     Abatement certification required within 10 days after abatement date.  The certification shall include a statement that abatement is complete, date and method of abatement and states employees and their representatives were informed of this abatement.

Issued

Dec 28, 2012

Abate by

Jan 4, 2013

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1926.454(a):     The employer did not have each employee who performs work while on a scaffold trained by a person qualified in the subject matter to recognize the hazards associated with the type of scaffold being used and to understand the procedures to control or minimize those hazards.    a) Jobsite - 1910 N. 18th Street - The employer did not provide each employee performing stucco operations with training to recognize the hazards and to understand the procedures to control the hazards associated with scaffolds, on or about 6/29/12.       Abatement certification required within 10 days after abatement date.  The certification shall include a statement that abatement is complete, date and method of abatement and states employees and their representatives were informed of this abatement.

Issued

Dec 28, 2012

Abate by

Jan 4, 2013

Penalty

Initial $1,600 · Current $1,600

General-duty citation text

29 CFR 1926.451(e)(1): When scaffold platforms were more than 2 feet (0.6 m) above or below a point of access, portable ladders, hook-on ladders, attachable ladders, stair towers (scaffold stairways/towers), stairway-type ladders (such as ladder stands), ramps, walkways, integral prefabricated scaffold access, or direct access from other scaffold, sturcure, personnel hoist, or similar surface was not used.  Crossbraces were used as a means of access.    Jobsite - 1910 N. 18th Street -A ladder or other safe means of access was not provided to employees working on the tubular welded frame scaffold.  Employees were using the side frames and cross bracing to access the working levels. Obsreved on or about 6/29/12.     Abatement certification required within 10 days after abatement date.  The certification shall include a statement that abatement is complete, date and method of abatement and states employees and their representatives were informed of this abatement.

Issued

Dec 28, 2012

Abate by

Jan 4, 2013

Penalty

Initial $2,000 · Current $2,000

General-duty citation text

29 CFR 1926.451(b)(1):       Each platform on all working levels of scaffolds was not fully planked or decked between the front uprights and the guardrail supports as follows:    a) Jobsite - 1910 N. 18th Street- The working levels of the tubular welded frame scaffold were not fully planked between the front and rear uprights.  Employees were working on the 3rd & 4th levels of the scaffold.  Observed on about 6/29/12.       Abatement certification required within 10 days after abatement date.  The certification shall include a statement that abatement is complete, date and method of abatement and states employees and their representatives were informed of this abatement.