APPLETON, WI ·
OSHA Inspection: LEE TRUCK EQUIPMENT, INC.
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of LEE TRUCK EQUIPMENT, INC. in 700 RANDOLPH DR., APPLETON, WI 54913 (NAICS 336211). OSHA activity number 335129789.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- LEE TRUCK EQUIPMENT, INC.
- Site address
- 700 RANDOLPH DR.
- City
- APPLETON
- State
- WI
- ZIP
- 54913
- Mailing
- 700 RANDOLPH DR., APPLETON, WI 54913
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- Non-union (B)
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 336211
- Employees
- 26
- Ownership type
- Private (A)
Citations
15 citations on file for this inspection.
1910.25 D01 I
- Issued
- Oct 30, 2012
- Abate by
- Oct 31, 2012
- Penalty
- Initial $2,800 · Current $1,200 Reduced
General-duty citation text
29 CFR 1910.25(d)(1)(i): Portable wood ladder(s) were not maintained in good condition at all times with all hardware and fittings securely attached: a) 4 step wood ladder had a detatched rung brace and unsecured side rail brace. b) 4 step fiberglass ladder had a damaged side rail. ABATEMENT CERTIFICATION AND ABATEMENT DOCUMENTATION REQUIRED
Recent events (2)
- · I (S) $1200
- · Z (S) $2800
1910.176 B
- Issued
- Oct 30, 2012
- Abate by
- Nov 6, 2012
- Penalty
- Initial $2,800 · Current $1,500 Reduced
General-duty citation text
29 CFR 1910.176(b): Storage of material created a hazard: a) Near the horizontal band saw, steel was cut off and stored on end, and was not secured against tipping over. ABATEMENT CERTIFICATION AND ABATEMENT DOCUMENTATION REQUIRED
Recent events (2)
- · I (S) $1500
- · Z (S) $2800
1910.178 A05
- Issued
- Oct 30, 2012
- Abate by
- Nov 29, 2012
- Penalty
- Initial $4,900 · Current $2,000 Reduced
General-duty citation text
29 CFR 1910.178(a)(5): A powered industrial truck was equipped with front-end attachments other than factory installed attachments, however the employer did not request that the truck be marked to identify the attachments and show the approximate weight of the truck and attachment combination at maximum elevation with load laterally centered: a) Hyster lift truck model H155XL, Serial F006A05965M was using 8' forks at the time of the inspection, and used a lifting device attachment for handling Pro-Tech SNO PUSHERS. There was no marking or rating on the Lift truck label for either attachment. ABATEMENT CERTIFICATION AND ABATEMENT DOCUMENTATION REQUIRED
Recent events (2)
- · I (S) $2000
- · Z (S) $4900
1910.178 L06
- Issued
- Oct 30, 2012
- Abate by
- Nov 29, 2012
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.178(l)(6): The employer did not certify that each operator has been trained and evaluated as required by this paragraph (l): a) Employer did not have training and certifcation records for employees operating lift trucks. ABATEMENT CERTIFICATION AND ABATEMENT DOCUMENTATION REQUIRED
Recent events (2)
- · I (S) $0
- · Z (S) $0
1910.178 O02
- Issued
- Oct 30, 2012
- Abate by
- Nov 29, 2012
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.178(o)(2): Loads outside the rated capacity of the trucks were handled a) Hyster lift truck model H155XL, Serial F006A05965M was using 8' forks at the time of the inspection and used a lifting device attachment for handling Pro-Tech SNO PUSHERS which were not marked or rated on the Lift truck label. ABATEMENT CERTIFICATION AND ABATEMENT DOCUMENTATION REQUIRED
Recent events (2)
- · I (S) $0
- · Z (S) $0
1910.184 I01
- Issued
- Oct 30, 2012
- Abate by
- Nov 6, 2012
- Penalty
- Initial $3,500 · Current $2,000 Reduced
General-duty citation text
29 CFR 1910.184(i)(1): Synthetic web sling(s) were not marked or coded to show rated capacities for each type of hitch and type of synthetic web material: a) Bay 7 area, nylon slings on community lifting rack did not have legible labels. ABATEMENT CERTIFICATION AND ABATEMENT DOCUMENTATION REQUIRED
Recent events (2)
- · I (S) $2000
- · Z (S) $3500
1910.212 A01
- Issued
- Oct 30, 2012
- Abate by
- Nov 6, 2012
- Penalty
- Initial $3,500 · Current $2,000 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: a) In Bay 15, the Spartan Iron Worker had a broken guard with missing piece approximately of 4 1/2" by 5". ABATEMENT CERTIFICATION AND ABATEMENT DOCUMENTATION REQUIRED
Recent events (2)
- · I (S) $2000
- · Z (S) $3500
1910.215 B09
- Issued
- Oct 30, 2012
- Abate by
- Oct 31, 2012
- Penalty
- Initial $2,800 · Current $0 Reduced
General-duty citation text
29 CFR 1910.215(b)(9): The distance between the abrasive wheel periphery(s) and the adjustable tongue or the end of the safety guard peripheral member at the top exceeded one fourth inch: a) In Bay 11/12, the Delta pedestal grinder had tongue guards that were out of adjustment. ABATEMENT CERTIFICATION AND ABATEMENT DOCUMENTATION REQUIRED
Recent events (2)
- · I (S) $0
- · Z (S) $2800
1910.244 A01 II
- Issued
- Oct 30, 2012
- Abate by
- Nov 29, 2012
- Penalty
- Initial $2,100 · Current $1,300 Reduced
General-duty citation text
29 CFR 1910.244(a)(1)(ii): Rated load(s) of portable jack(s) were not legibly and permanently marked in a prominent location on the jack(s) by casting, stamping, or other suitable means: a) Two of three floor jacks used at the shop were not legibly marked. ABATEMENT CERTIFICATION AND ABATEMENT DOCUMENTATION REQUIRED
Recent events (2)
- · I (S) $1300
- · Z (S) $2100
1910.244 A02 II
- Issued
- Oct 30, 2012
- Abate by
- Nov 29, 2012
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.244(a)(2)(ii): The operator did not watch the stop indicator, which shall be kept clean, in order to determine the limit of travel: a) The three floor jacks were missing the stop indicator limit of travel markings. ABATEMENT CERTIFICATION AND ABATEMENT DOCUMENTATION REQUIRED
Recent events (2)
- · I (S) $0
- · Z (S) $0
1910.244 A02 VI A
- Issued
- Oct 30, 2012
- Abate by
- Nov 29, 2012
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.244(a)(2)(vi)(a): Each jack used constantly or intermittently at a single locality was not thoroughly inspected at least once every six months: The three floor jacks were not inspected at least once every six months. ABATEMENT CERTIFICATION AND ABATEMENT DOCUMENTATION REQUIRED
Recent events (2)
- · I (S) $0
- · Z (S) $0
1910.253 B02 II
- Issued
- Oct 30, 2012
- Abate by
- Oct 31, 2012
- Penalty
- Initial $3,500 · Current $2,000 Reduced
General-duty citation text
29 CFR 1910.253(b)(2)(ii): Assigned storage spaces for cylinders was not located away from elevators, stairs, or gangways where cylinders could not be knocked over or damaged by passing or falling objects, or subject to tampering by unauthorized persons: a) Bay 14 area, an oxygen cylinder in storage was located below a stairway with three acetylene tanks in close proximity. ABATEMENT CERTIFICATION AND ABATEMENT DOCUMENTATION REQUIRED
Recent events (2)
- · I (S) $2000
- · Z (S) $3500
1910.253 B04 III
- Issued
- Oct 30, 2012
- Abate by
- Oct 31, 2012
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.253(b)(4)(iii): Oxygen cylinders in storage were not separated from fuel-gas cylinders or combustible materials (especially oil or grease), a minimum distance of 20 feet (6.1 m) or by a noncombustible barrier at least 5 feet (1.5 m) high having a fire-resistance rating of at least one hour: a) Oxygen cylinder in storage had three aceteylene cylinders stored along the same wall within 20 feet. ABATEMENT CERTIFICATION AND ABATEMENT DOCUMENTATION REQUIRED
Recent events (2)
- · I (S) $0
- · Z (S) $0
1910.22 D01
- Issued
- Oct 30, 2012
- Abate by
- Nov 29, 2012
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.22(d)(1): In every building or other structure, or part thereof, used for mercantile, business, industrial, or storage purposes, the loads approved by the building official were not marked in a conspicuous place in each space to which they related: a) Take off lights storage loft did not have load limit signs in place to designate capacity. ABATEMENT CERTIFICATION AND ABATEMENT DOCUMENTATION REQUIRED
Recent events (2)
- · I (O) $0
- · Z (O) $0
1910.37 B01
- Issued
- Oct 30, 2012
- Abate by
- Nov 29, 2012
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.37(b)(1): Each exit route was not adequately lighted so that an employee with normal vision can see along the exit route. a) Locker room stairs were not adequately lighted when natural lighting was not available. ABATEMENT CERTIFICATION AND ABATEMENT DOCUMENTATION REQUIRED
Recent events (2)
- · I (O) $0
- · Z (O) $0
More inspections at LEE Truck Equipment, INC.
View LEE Truck Equipment, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 336211)
More inspections in WI
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 335129789.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.