Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,194,531Inspections Most recent open 2026-08-11 Last loaded 2026-08-14

OSHA Inspection: WAYNE'S ROOFING & SHEET METAL, INC.

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of WAYNE'S ROOFING & SHEET METAL, INC. in 283 COLLEGE DRIVE, ORANGE PARK, FL 32067 (NAICS 236220). OSHA activity number 335176582.

What this inspection record means

OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Wayne'S Roofing & Sheet Metal, INC. for free Get an email when a new federal OSHA severe-injury report for Wayne'S Roofing & Sheet Metal, INC. is published. One employer, no account, unsubscribe in one click.
Site address
283 COLLEGE DRIVE
City
ORANGE PARK
State
FL
ZIP
32067
Mailing
406 WALKER STREET, HOLLY HILL, FL 32117
Inspection type
Planned (H)
Scope
Complete (A)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
236220
Employees
3
Ownership type
A

5 citations on file for this inspection.

1926.352 D

Serious Gravity 5 1 instance 3 exposed
Issued
Sep 10, 2012
Penalty
Initial $2,000 · Current $1,000 Reduced
29 CFR 1926.352(d):  Suitable fire extinguishing equipment was not immediately available in the work area(s) where welding, cutting, or heating was being performed:    a.  On or about July 12, 2012, on the roof, employees conducting torch operations while laying tar did not have a fire extinguisher, exposing themselves to a fire hazard.
Recent events (2)
  • · I (S) $1000
  • · Z (S) $2000

1926.501 B10

Serious Gravity 5 1 instance 3 exposed
Issued
Sep 10, 2012
Penalty
Initial $2,400 · Current $1,000 Reduced
29 CFR 1926.501(b)(10):  Each employee engaged in roofing activities on low-slope roofs, with unprotected sides and edges 6 feet (1.8 m) or more above lower levels, was not protected from falling by guardrail systems, safety net systems, personal fall arrest system:    a. On or about July 12, 2012, on the 4:12 pitch roof, employees conducting roofing operations were not protected from a 12 feet fall hazard by the use of a guardrail system, safety net system, or a personal fall arrest system.
Recent events (2)
  • · I (S) $1000
  • · Z (S) $2400

1926.501 B11

Serious Gravity 5 1 instance 3 exposed
Issued
Sep 10, 2012
Penalty
Initial $0 · Current $0
29 CFR 1926.501(b)(11):  Each employee on a steep roof with unprotected sides and edges 6 feet (1.8 m) or more above lower levels was not protected from falling by guardrail systems with toeboards, safety net systems, or personal fall arrest systems:    a.  On or about July 12, 2012, on the 6:12 pitch roof, employees conducting roofing operations were not protected from a 15 feet fall hazard by the use of a guardrail system, safety net system, or a personal fall arrest system.
Recent events (2)
  • · I (S) $0
  • · Z (S) $0

1926.503 A01

Serious Gravity 5 1 instance 3 exposed
Issued
Sep 10, 2012
Abate by
Sep 24, 2012
Penalty
Initial $0 · Current $0
29 CFR 1926.503(a)(1):  The employer did not provide a training program for each employee who might be exposed to fall hazards:    a.  On or about July 12, 2012, the employer did not train employees performing roofing operations about fall protection and the hazards associated with roofs.
Recent events (2)
  • · I (S) $0
  • · Z (S) $0

1926.1053 B16

Serious Gravity 5 1 instance 3 exposed
Issued
Sep 10, 2012
Penalty
Initial $1,600 · Current $1,600
29 CFR 1926.1053(b)(16):  Portable ladders with structural defects, such as, but not limited to, broken or missing rungs, cleats, or steps, broken or split rails, corroded components, or other faulty or defective components, were not either immediately marked in a manner that readily identifies them as defective, or tagged with "Do Not Use" or similar language, and were not withdrawn from service until repaired:    a.  On or about July 12, 2012, the 24-foot aluminum extension ladder used to access the roof had bent rungs, rails, and a defective locking device, exposing employees to a 15 feet fall hazard.
Recent events (2)
  • · I (S) $1600
  • · Z (S) $1600

View Wayne'S Roofing & Sheet Metal, INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 335176582.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.