MACON, GA ·
OSHA Inspection: MACON BEVERAGE CO., LLC
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of MACON BEVERAGE CO., LLC in 4375 SAN CARLOS DRIVE, MACON, GA 31206 (NAICS 424810). OSHA activity number 335288999.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- MACON BEVERAGE CO., LLC
- Site address
- 4375 SAN CARLOS DRIVE
- City
- MACON
- State
- GA
- ZIP
- 31206
- Mailing
- 4375 SAN CARLOS DRIVE, MACON, GA 31206
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- Non-union (B)
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 424810
- Employees
- 46
- Ownership type
- Private (A)
Citations
4 citations on file for this inspection.
1910.22 A01
- Issued
- Nov 2, 2012
- Abate by
- Nov 27, 2012
- Penalty
- Initial $2,100 · Current $1,050 Reduced
General-duty citation text
29 CFR 1910.22(a)(1): All places of employment, passageways, storerooms or service rooms were not kept clean and orderly or in a sanitary condition. On or about 07/10/12 employees were exposed to a tripping hazard due to the employer keeping the storage garage on the west side in disarray. Boxes, trash, parts and other items were thrown all over the garage area. In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (2)
- · I (S) $1050
- · Z (S) $2100
1910.305 B01 II
- Issued
- Nov 2, 2012
- Abate by
- Nov 27, 2012
- Penalty
- Initial $2,800 · Current $1,400 Reduced
General-duty citation text
29 CFR 1910.305(b)(1)(ii): Unused openings in boxes, cabinets, or fittings were not effectively closed: On or about 07/10/12 an employee was exposed to an electrical hazard while operating the breaker for the light switch in the electrical panel on the east side of the warehouse. The panel had an unused opening. In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (2)
- · I (S) $1400
- · Z (S) $2800
1910.178 L04 I
- Issued
- Nov 2, 2012
- Abate by
- Nov 27, 2012
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.178(l)(4)(i): Refresher training, including an evaluation of the effectiveness of that training, was not conducted as required by paragraph (l)(4)(ii) to ensure that the operator had the knowledge and skills needed to operate the powered industrial truck safely On or about 07/10/12 employees were exposed to a struck by hazard while operating a power industrial truck to retrieve and store boxes in the garage, fill the line and drop pallets in the production department of the warehouse. The employer did not provide retraining for the employees to ensure that they had the ability to safely operate a power industrial truck. In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (2)
- · I (O) $0
- · Z (O) $0
1910.303 F02
- Issued
- Nov 2, 2012
- Abate by
- Nov 27, 2012
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.303(f)(2): Each service, feeder, and branch circuit, at its disconnecting means or overcurrent device, was not legibly marked to indicate its purpose, nor located and arranged so the purpose was evident: An employee was exposed to an electrical hazard while operating the breaker switch from the panel on the east side of the warehouse due the employer not having the panel legibly marked. In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (2)
- · I (O) $0
- · Z (O) $0
More inspections in this industry (NAICS 424810)
More inspections in GA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 335288999.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.