Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,214Inspections Most recent open 2026-07-16 Last loaded 2026-07-20

OSHA Inspection: ROCK ON FRAMING, INC.

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of ROCK ON FRAMING, INC. in 575 24 1/2 ROAD, GRAND JUNCTION, CO 81501 (NAICS 238130). OSHA activity number 335318382.

Watch Rock ON Framing, INC. — free Get an email when a new federal OSHA severe-injury report for Rock ON Framing, INC. is published. One employer, no account, unsubscribe in one click.
Site address
575 24 1/2 ROAD
City
GRAND JUNCTION
State
CO
ZIP
81501
Mailing
2220 SAN JACINTO BLVD., STE 316, DENTON, TX 76205
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238130
Employees
20
Ownership type
A

3 citations on file for this inspection.

1926.100 A

Serious Gravity 1 2 exposed
Issued
Abate by
Penalty
Initial $1020.00 · Current $510.00 Reduced
29 CFR 1926.100(a): Employees working in areas where there is a possible danger of head injury from impact, or from falling or flying objects, or from electrical shock and burns, shall be protected by protective helmets.    (a)	Rock On Framing, Inc., 575 24  Rd., Grand Junction, CO 81501:  On and before July 19, 2012 the employer did not provide hard hats to employees who were working below an aerial lift.    Abatement Note:  Abatement certification is required for this item (see enclosed "Certification of Corrective Action Worksheet").
Recent events (2)
  • — I (S) $510
  • — Z (S) $1020

1926.453 B02 V

Serious Gravity 5 2 exposed
Issued
Penalty
Initial $2040.00 · Current $1020.00 Reduced
29 CFR 1926.453(b)(2)(v):  A body belt with lanyard attached to the boom or basket was not worn by employee(s) working from an aerial lift:    (a)	Rock On Framing, Inc., 575 24  Rd., Grand Junction, CO 801501:  On or before August 28, 2009, an employee was attaching siding from the basket of a Genie S-60 aerial lift and was not wearing fall protection. This hazard exposed the employee to a fall of approximately 10 feet.    Abatement Note: A personal fall arrest system is recommended with lanyard attached to the boom or basket when working from an aerial lift. As of January 1, 1998, Subpart M of the 29 CFR 1926 part 1926.502(d) provides that body belts are not acceptable as part of a personal fall arrest system. The use of a body belt in a tethering system or in a restraint system is acceptable and is regulated under 1926.502(e).    Abatement Note:  Abatement certification is not required for this item (see enclosed Abatement-Certification Letter").
Recent events (2)
  • — I (S) $1020
  • — Z (S) $2040

1926.501 B01

Serious Gravity 5 1 exposed
Issued
Penalty
Initial $2040.00 · Current $1020.00 Reduced
29 CFR 1926.501(b)(1): Each employee on a walking/working surface with an unprotected side or edge which was 6 feet (1.8 m) or more above a lower level was not protected from falling by the use of guardrail systems, safety net systems, or personal fall arrest systems.    (a)	Rock On Framing, Inc., 575 24  Rd., Grand Junction, CO 801501:  On or before July 18, 2012, an employee of the roof was not wearing fall protection while attaching siding to the building. This exposed the employee to a fall of approximately 18 feet.     Abatement Note:  Abatement certification is not required for this item (see enclosed Abatement-Certification Letter").
Recent events (2)
  • — I (S) $1020
  • — Z (S) $2040

View ROCK ON FRAMING, INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 335318382.