PIQUA, OH —
OSHA Inspection: MIAMI VALLEY POLISHING, LLC
Follow-up inspection · Safety discipline
At a glance
On , OSHA opened a follow-up safety inspection of MIAMI VALLEY POLISHING, LLC in 220 FOX DRIVE, PIQUA, OH 45356 (NAICS 332813). OSHA activity number 335389581.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- MIAMI VALLEY POLISHING, LLC
- Site address
- 220 FOX DRIVE
- City
- PIQUA
- State
- OH
- ZIP
- 45356
- Mailing
- 220 FOX DRIVE, PIQUA, OH 45356
What kind of inspection was it?
- Inspection type
- Follow-up (F)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332813
- Employees
- 43
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.25 D02 XV
- Issued
- Oct 16, 2012
- Abate by
- Oct 30, 2012
- Penalty
- Initial $2,310 · Current $1,000 Reduced
General-duty citation text
29 CFR 1910.25(d)(2)(xv): No ladder should be used to gain access to a roof unless the top of the ladder shall extend at least 3 feet above the point of support, at eave, gutter, or roofline; a) Ladder in the shop used to gain access to the overhead platform did not extend three feet above the edge in that emloyees had to stand on the top step of the ladder to gain access.
Recent events (2)
- — I (S) $1000
- — Z (S) $2310
1910.305 G02 III
- Issued
- Oct 16, 2012
- Abate by
- Oct 30, 2012
- Penalty
- Initial $2,310 · Current $500 Reduced
General-duty citation text
29 CFR 1910.305(g)(2)(iii): Flexible cords and cables shall be connected to devices and fittings so that strain relief is provided that will prevent pull from being directly transmitted to joints or terminal screws. a) Flexible cord attached to the Hammand polishing/buffing machine was not equipped with a strain relief to prevent movement and/or damage to conductors.
Recent events (2)
- — I (S) $500
- — Z (S) $2310
1910.147 D03
- Issued
- Oct 16, 2012
- Abate by
- Nov 6, 2012
- Penalty
- Initial $5,600 · Current $2,500 Reduced
General-duty citation text
29 CFR 1910.147(d)(3): Machine or equipment isolation. All energy isolating devices that are needed to control the energy to the machine or equipment shall be physically located and operated in such a manner as to isolate the machine or equipment from the energy source(s). a) On or about May 25, 2012 electrical disconnect on the buffing/polishing machine in the polishing department was not actuated to disable power while changing a buffing wheel belt.
Recent events (2)
- — I (R) $2500
- — Z (R) $5600
1910.147 D04 I
- Issued
- Oct 16, 2012
- Abate by
- Nov 6, 2012
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(d)(4)(i): Lockout or tagout devices shall be affixed to each energy isolating device by authorized employees. a) On or about May 25, 2012 a lockout device(s) was not attached to the energy isolating point on the polishing machine in the polishing department during a buffing wheel belt change.
Recent events (2)
- — I (R) $0
- — Z (R) $0
1910.219 E03 I
- Issued
- Oct 16, 2012
- Abate by
- Nov 6, 2012
- Penalty
- Initial $4,200 · Current $1,700 Reduced
General-duty citation text
29 CFR 1910.219(e)(3)(i): Vertical and inclined belts shall be enclosed by a guard conforming to standards in paragraphs (m) and (o) of this section. a) Guarding was not provided on the main motor drive belt of the Hammand polishing/buffing machine to prevent employees' exposure to rotating parts.
Recent events (2)
- — I (R) $1700
- — Z (R) $4200
More inspections at Miami Valley Polishing, LLC
View Miami Valley Polishing, LLC's full OSHA safety record →
More inspections in this industry (NAICS 332813)
More inspections in OH
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 335389581.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.