OSHA Inspection: CARQUEVILLE

Issued

Aug 7, 2012

Abate by

Sep 5, 2012

Penalty

Initial $4,250 · Current $2,125 Reduced

General-duty citation text

29 CFR 1910.147(c)(6)(i): The employer did not conduct an annual or more frequent inspection of the energy control procedure to ensure that the procedure and requirements of this standard were followed:      a) Facility Wide - An annual or more frequent inspection of the energy control procedure was not completed to ensure the procedure was being followed and requirements of the standard were followed for machinery including but not limiited to the printing press #57.     In accordance with 29CFR 1903.19(c), abatement certification is required for this violation (using CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation that abatement is complete must be included with your certification. This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement or other written records.

Issued

Aug 7, 2012

Abate by

Oct 5, 2012

Penalty

Initial $2,550 · Current $1,275 Reduced

General-duty citation text

29 CFR 1910.178(g)(2): Battery charging apparatus for industrial trucks located in battery changing and charging installation was not protected from damage by trucks:      a)  Battery Charging Area/ Bindery - No protection was provided for six out of the seven industrial truck battery charging apparatuses.     In accordance with 29CFR 1903.19(c), abatement certification is required for this violation (using CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation that abatement is complete must be included with your certification. This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement or other written records.

Issued

Aug 7, 2012

Abate by

Sep 5, 2012

Penalty

Initial $3,400 · Current $1,700 Reduced

General-duty citation text

29 CFR 1910.178(l)(4)(iii): An evaluation of each powered industrial truck operator's performance was not being conducted at least once every three years:      a) Facility wide - All powered industrial truck operators were not evaluated on the operation of the powered industrial trucks at least once every three years.       In accordance with 29CFR 1903.19(c), abatement certification is required for this violation (using CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation that abatement is complete must be included with your certification. This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement or other written records.

Issued

Aug 7, 2012

Penalty

Initial $2,890 · Current $1,445 Reduced

General-duty citation text

29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks:      a) Printing Press Area/ Press 57 - The coater component of Press 57 was not guarded during operation.       No abatement certification or documentation is required for this item.

Issued

Aug 7, 2012

Penalty

Initial $2,168 · Current $1,455 Reduced

General-duty citation text

29 CFR 1910.303(b)(2): Listed or labeled electrical equipment was not used or installed in accordance with instructions included in the listing or labeling:      a) Bindery Area/ Skid packing - A power stripwas used for woodworking hand power tools such as Skilsaw worm drive saw S/N - HG-00479.  It was not used in accordance with instructions included in the listing or labeling.     No abatement certification or documentation is required for this item.

Issued

Aug 7, 2012

Penalty

Initial $723 · Current $0 Reduced

General-duty citation text

29 CFR 1910.334(a)(2)(i): Portable cord and plug connected equipment and flexible cord sets (extension cords) were not visually inspected before use on any shift for external defects (such as loose parts, deformed and missing pins, or damage to outer jacket or insulation) and for evidence of possible internal damage (such as pinched or crushed outer jacket):    a) Skid builder area/ Bindery area -  A skilsaw worm drive saw (SN - HG00479)  had a damaged outer jacket or insulation at the connection point of the flexible cord and the beginning of the saw along with electrical tape being wrapped on the flexible cord itself about six inches below the handle.       No abatement certification or documentation is required for this item.

Issued

Aug 7, 2012

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1910.305(b)(1)(ii): Unused openings in boxes, cabinets, or fittings were not effectively closed:      a)  Skid Turner Location/ Pressroom - The skid turners electrical panel was not effetively closed and secured.       No abatement certification or documentation is required for this item.