DES PLAINES, IL —
OSHA Inspection: ALLIANCE SERVICES GROUP OF IL
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of ALLIANCE SERVICES GROUP OF IL in 950 LEE STR., DES PLAINES, IL 60016 (NAICS 238130). OSHA activity number 335529996.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- ALLIANCE SERVICES GROUP OF IL
- Site address
- 950 LEE STR.
- City
- DES PLAINES
- State
- IL
- ZIP
- 60016
- Mailing
- 10261 FRANKLIN AVE., FRANKLIN PARK, IL 60131
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238130
- Employees
- 9
- Ownership type
- A
Citations
5 citations on file for this inspection.
1903.19 C01
- Issued
- Nov 26, 2012
- Abate by
- Jan 14, 2013
- Penalty
- Initial $400 · Current $400
General-duty citation text
29 CFR 1903.19(c)(1): The employer did not certify to OSHA, within 10 calendar days after the abatement date, that the cited violation had been abated: Alliance Services Group Of IL failed to certify to OSHA within 10 calendar days after the abatement date that each of the following cited violations had been corrected: Citation Number Item Number Abatement Date 01 03 9/14/2012 In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (1)
- — Z (O) $400
1926.451 C01 II
- Issued
- Aug 16, 2012
- Penalty
- Initial $2,000 · Current $2,000
General-duty citation text
29 CFR 1926.451(c)(1)(ii): Guys, ties, and/or braces were not installed according to the scaffold manufacturer's recommendations or at the closest horizontal member to the 4:1 height and repeated vertically at locations of horizontal members every 20 feet (56.1 m) or less thereafter for scaffolds 3 feet ((0.91 m) wide or less, and every 26 feet (7.9 m) or less thereafter for scaffolds greater than 3 feet (0.91m) wide: a) Employees were working from a scaffolding structure that was five frames high and was not tied to the building. No abatement certification or documentation is required for this item.
Recent events (1)
- — Z (S) $2000
1926.452 W02
- Issued
- Aug 16, 2012
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.452(w)(2): Scaffold casters and wheels were not locked with positive wheel and/or wheel and swivel locks, or equivalent means, to prevent movement of the scaffold while the scaffold was used in a stationary manner: a) Scaffold casters and wheels were not locked while the scaffold was used by employees in a stationary manner. No abatement certification or documentation is required for this item.
Recent events (1)
- — Z (S) $0
1926.451 G01
- Issued
- Aug 16, 2012
- Penalty
- Initial $2,800 · Current $2,800
General-duty citation text
29 CFR 1926.451(g)(1): Each employee on a scaffold more than 10 feet above a lower level was not protected from falling to that lower level: a) Employees were not protected from hazards of falling while working from tubular welded frame scaffold platform elevated approximately 25 feet above the ground. No abatement certification or documentation is required for this item.
Recent events (1)
- — Z (S) $2800
1926.454 A
- Issued
- Aug 16, 2012
- Abate by
- Sep 14, 2012
- Penalty
- Initial $2,000 · Current $2,000
General-duty citation text
29 CFR 1926.454(a): The employer did not have each employee who performed work while on a scaffold trained by a person qualified in the subject matter to recognize the hazards associated with the type of scaffold being used and to understand the procedures to control or minimize those hazards: a) Employer did not provide training to each employee in order to recognize hazards associated with working from tubular welded frame scaffolding and to understand procedures to control or minimize those hazards. In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (1)
- — Z (S) $2000
More inspections in this industry (NAICS 238130)
More inspections in IL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 335529996.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.