Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,193,745Inspections Most recent open 2026-08-06 Last loaded 2026-08-10

OSHA Inspection: ELLISON-MILLS CONTRACTING LLC

Federal Agency inspection · Safety discipline

On , OSHA opened a federal Agency safety inspection of ELLISON-MILLS CONTRACTING LLC in AKIMEL SMOKE SHOP RIGGS ROAD AND I-10, CHANDLER, AZ 85224 (NAICS 237110). OSHA activity number 335581187.

What this inspection record means

OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Ellison-Mills Contracting LLC for free Get an email when a new federal OSHA severe-injury report for Ellison-Mills Contracting LLC is published. One employer, no account, unsubscribe in one click.
Site address
AKIMEL SMOKE SHOP RIGGS ROAD AND I-10
City
CHANDLER
State
AZ
ZIP
85224
Mailing
3152 N. LEAR AVE SUITE 2, CASA GRANDE, AZ 85222
Inspection type
Federal Agency (M)
Scope
Complete (A)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Case closed
Last modified
Data loaded
NAICS code
237110
Employees
23
Ownership type
A

3 citations on file for this inspection.

5(a)(1)

Serious Gravity 10 2 instances 1 exposed
Issued
Jan 28, 2013
Abate by
Feb 6, 2013
Penalty
Initial $2,800 · Current $2,800
OSH ACT of 1970 Section (5)(a)(1): The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to struck-by hazards while working in a trench:    (a) LOCATION: Akimel Smoke Shop Property, 4321 East Riggs Road, Chandler, AZ 85248:  On or about 2 August 2012, the employer failed to ensure that manufacturer instructions and standard operating procedures were followed when attaching a bucket shovel to a JRB Smart-Loc quick coupler on the boom arm of a Komatsu PC200LC track hoe excavator. The employer did not remove lifting devices previously attached to the quick coupler, which could interfere with the locking mechanism. As a result, the bucket shovel detached during use and rolled into the excavation, fatally injuring an employee.     (b) LOCATION: Akimel Smoke Shop Property, 4321 East Riggs Road, Chandler, AZ 85248: On or about 2 August 2012, the employer failed to ensure that manufacturer instructions and standard operating procedures were followed when attaching a bucket shovel to a JRB Smart-Loc quick coupler on the boom arm of a Komatsu PC200LC track hoe excavator. The operator failed to perform the required "ground test" to determine if the shovel was securely attached prior to use.  As a result, the bucket shovel detached during use and rolled into the excavation, fatally injuring an employee.
Recent events (2)
  • · I (S) $2800
  • · Z (S) $2800

1926.20 B02

Serious Gravity 10 1 instance 1 exposed
Issued
Jan 28, 2013
Abate by
Feb 6, 2013
Penalty
Initial $2,800 · Current $2,800
29 CFR 1926.20(b)(2): The employer did not initiate and maintain programs which provided for frequent and regular inspections of the job sites, materials, and equipment to be made by competent persons designated by the employers.    (a) LOCATION: Akimel Smoke Shop Property, 4321 East Riggs Rd., Chandler, AZ 85248: On or about 2 August 2012, the employer attached an approximate 1500 lb. bucket shovel to the quick coupler device on the boom arm of a Komatsu PC200LC track hoe excavator. The employer failed to visually inspect the quick coupler device prior to or after attachment, and prior to use.
Recent events (2)
  • · I (S) $2800
  • · Z (S) $2800

1926.21 B02

Serious Gravity 10 1 instance 2 exposed
Issued
Jan 28, 2013
Abate by
Feb 6, 2013
Penalty
Initial $2,800 · Current $2,240 Reduced
29 CFR 1926.21(b)(2): The employer did not instruct each employee in the recognition and avoidance of unsafe condition(s) and the regulation(s) applicable to his work environment to control or eliminate any hazard(s) or other exposure to illness or injury:    (a) LOCATION: Akimel Smoke Shop property, 4321 East Riggs Road, Chandler, AZ 85248:  On or about 2 August 2012, the employer failed to instruct employees and the foreman/operator of the Komatsu PC200LC track hoe excavator to recognize and avoid the unsafe condition of operating the excavator's bucket shovel in close proximity to employees. The operator swung the boom arm and bucket shovel to the end of an open excavation, exposing employees to the hazard of becoming struck by equipment falling or rolling into the excavation.
Recent events (2)
  • · I (S) $2240
  • · Z (S) $2800

View Ellison-Mills Contracting LLC's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 335581187.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.