Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: AMERICAN THERMAL SYSTEMS INC.

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of AMERICAN THERMAL SYSTEMS INC. in 231 SAN SABA COURT, BLANCO, TX 78606 (NAICS 236210). OSHA activity number 335604617.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch American Thermal Systems INC. — free Get an email when a new federal OSHA severe-injury report for American Thermal Systems INC. is published. One employer, no account, unsubscribe in one click.
Site address
231 SAN SABA COURT
City
BLANCO
State
TX
ZIP
78606
Mailing
P.O. BOX 2512, CONROE, TX 77305
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
236210
Employees
11
Ownership type
A

3 citations on file for this inspection.

1926.453 B02 V

Other-than-serious 2 instances 3 exposed
Issued
Aug 13, 2012
Abate by
Aug 14, 2012
Penalty
Initial $1,440 · Current $1,440
29 CFR 1926.453(b)(2)(v): A body belt was not worn and/or a lanyard was not attached to the boom or basket when working from an aerial lift:  Note:  As of January 1, 1998, subpart M of this part (1926.502(d)) provides that body belts are not acceptable as part of a personal fall arrest system.  The use of a body belt in a tethering system or in a restraint system is acceptable and is regulated.  On or about August 07, 2012 at the construction site located at 231 San Saba Court, Blanco, TX, where two employees had body belts on and did not attach the lanyards to the baskets or booms of the two Genie S-60 aerial lifts while another employee in one of the baskets was not wearing a body belt while in the basket.  Pursuant to 29 C.F.R. 1903.19, within ten (10) calendar days of the date of this citation, the employer must submit documentation showing that it is in compliance with the standard, including describing the steps that it is taking to ensure that each employee in an aerial lift will wear a body belt and attaches the lanyard to the basket or boom.
Recent events (2)
  • — I (O) $1440
  • — Z (S) $1440

1926.501 B01

Serious Gravity 5 2 instances 7 exposed
Issued
Aug 13, 2012
Abate by
Aug 14, 2012
Penalty
Initial $1,800 · Current $1,800
29 CFR 1926.501(b)(1): Each employee on a walking/working surface with an unprotected side or edge which was 6 feet (1.8 m) or more above a lower level was not protected from falling by the use of guardrail systems, safety net systems, or personal fall arrest systems.  On or about August 07, 2012 at the construction site located at 231 San Saba Court, Blanco, TX, employees were installing the gutter system to the perimeter edge of the building and 3 employees working on the Southeast side were leaning over the edge being exposed to a 7 foot fall. Several other employees were walking, standing and/or leaning over the edge of the South side wall of the building, exposing employees to the hazard of a 19 foot fall.  Pursuant to 29 C.F.R. 1903.19, within ten (10) calendar days of the date of this citation, the employer must submit documentation showing that it is in compliance with the standard, including describing the steps that it is taking to ensure that each employee on a walking/working surface with an unprotected side or edge which is 6 feet (1.8 m) or more above a lower level is protected from falling by the use of guardrail systems, safety net systems, or personal fall arrest systems.
Recent events (2)
  • — I (S) $1800
  • — Z (S) $1800

1926.1053 B04

Deleted Serious Gravity 1 1 instance 1 exposed
Issued
Aug 13, 2012
Abate by
Aug 14, 2012
Penalty
Initial $1,080 · Current $0 Reduced
29 CFR 1926.1053(b)(4): Ladder(s) were used for purposes other than the purpose for which they were designed:  On or about August 07, 2012 at the construction site located at 231 San Saba Court, Blanco, TX, where an employee was using/working from a 6 foot "A" frame step ladder which he leaned up against the building instead of placing the step ladder in an open position with the metal spreader locking the front and back sections open, exposing employee to the hazard of a 4 foot fall.  Pursuant to 29 C.F.R. 1903.19, within ten (10) calendar days of the date of this citation, the employer must submit documentation showing that it is in compliance with the standard, including describing the steps that it is taking to ensure that ladder(s) are used only for the purpose for which they were designed.
Recent events (2)
  • — I (S) $0
  • — Z (S) $1080

View American Thermal Systems INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 335604617.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.