LEE, NH —
OSHA Inspection: A & A WHEELER MANUFACTURING INC.
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of A & A WHEELER MANUFACTURING INC. in 300 CALEF HIGHWAY., LEE, NH 03824 (NAICS 321114). OSHA activity number 335629382.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- A & A WHEELER MANUFACTURING INC.
- Site address
- 300 CALEF HIGHWAY.
- City
- LEE
- State
- NH
- ZIP
- 03824
- Mailing
- 300 CALEF HIGHWAY., LEE, NH 03824
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 321114
- Employees
- 22
- Ownership type
- A
Citations
7 citations on file for this inspection.
1910.22 A01
- Issued
- Sep 18, 2012
- Abate by
- Sep 19, 2012
- Penalty
- Initial $1,600 · Current $0 Reduced
General-duty citation text
29 CFR 1910.22(a)(1): All places of employment, passageways, storerooms or service rooms were not kept clean and orderly or in a sanitary condition. a. Site - Housekeeping was inadequate in that saw dust, wood scrap and other debris was allowed to accumulate on the shop floors creating slip and fall hazards.
Recent events (2)
- — I (O) $0
- — Z (S) $1600
1910.23 C01
- Issued
- Sep 18, 2012
- Abate by
- Sep 19, 2012
- Penalty
- Initial $2,000 · Current $2,000
General-duty citation text
29 CFR 1910.23(c)(1): Every open-sided floor or platform 4 feet or more above adjacent floor or ground level was not guarded by a standard railing (or the equivalent as specified in paragraph (e)(3) of this section) on all open sides and railings were not provided as required: a. Parts Building - Guardrails were not provided at the overhead storage area to prevent falls.
Recent events (2)
- — I (S) $2000
- — Z (S) $2000
1910.23 D01
- Issued
- Sep 18, 2012
- Abate by
- Sep 19, 2012
- Penalty
- Initial $2,000 · Current $0 Reduced
General-duty citation text
29 CFR 1910.23(d)(1): Every flight of stairs having four or more risers was not equipped with standard stair railings or standard handrails as specified in paragraphs (d)(1)(i) through (v) of this section, the width of the stair to be measured clear of all obstructions except handrails: a. Site Parts Building - Handrails were not provided for the access staircase leading to overhead storage area.
Recent events (2)
- — I (S) $0
- — Z (S) $2000
1910.242 B
- Issued
- Sep 18, 2012
- Abate by
- Sep 19, 2012
- Penalty
- Initial $2,000 · Current $1,500 Reduced
General-duty citation text
29 CFR 1910.242(b): Compressed air used for cleaning purposes was not reduced to less than 30 p.s.i.: a. Site - Compressed air utilized for cleaning purposes at employees workstations was at 92 PSI.
Recent events (2)
- — I (S) $1500
- — Z (S) $2000
1910.243 A01 I
- Issued
- Sep 18, 2012
- Abate by
- Sep 19, 2012
- Penalty
- Initial $2,800 · Current $2,800
General-duty citation text
29 CFR 1910.243(a)(1)(i): Portable power driven circular saw(s) having a blade diameter greater than two inches were not equipped with guard(s) below the base plate or shoe which automatically and instantly returned to the covering position when the tool was withdrawn from the work: a. Site Parts Building - Two Porter-Cable (PC15CSL) 7 1/4-Inch circular saws in use were not guarded which cause and could cause amputations.
Recent events (2)
- — I (S) $2800
- — Z (S) $2800
1910.243 A02 I
- Issued
- Sep 18, 2012
- Abate by
- Sep 19, 2012
- Penalty
- Initial $2,800 · Current $2,800
General-duty citation text
29 CFR 1910.243(a)(2)(i): Constant pressure switch(es) or control(s) which would shut off the power when pressure is released were not provided on a hand held power circular saw having a blade diameter greater than 2 inches: a. Site homemade tablesaw - Switch controls for two Porter-Cable (PC15CSL) 7 1/4-Inch circular saws were zip tied thus thus eliminating their operability.
Recent events (2)
- — I (S) $2800
- — Z (S) $2800
1910.157 C01
- Issued
- Sep 18, 2012
- Abate by
- Sep 19, 2012
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.157(c)(1): Portable fire extinguishers were not mounted, located and identified so that they were readily accessible without subjecting the employees to injuries: a. Site - A portable fire extinguisher was blocked by stored materials.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at A & a Wheeler Manufacturing INC.
View A & a Wheeler Manufacturing INC.'s full OSHA safety record →
More inspections in this industry (NAICS 321114)
More inspections in NH
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 335629382.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.