OSHA Inspection: CEN-OK SERVICES, LLC

Issued

Nov 1, 2012

Abate by

Nov 8, 2012

Penalty

Initial $1,600 · Current $800 Reduced

General-duty citation text

29 CFR 1910.178(l)(1)(i):     The employer did not ensure that each powered industrial truck operator was competent to operate a powered industrial truck safely, as demonstrated by the successful completion of the training and evaluation specified in this paragraph (l):    At the worksite:  On or about August 1, 2012, and at times prior thereto, the employer allowed an employee to operate a rough terrain type forklift without providing the required training and evaluation for powered industrial trucks.  Employees were exposed to fall from heights, caught in between and struck-by hazards.

Issued

Nov 1, 2012

Abate by

Nov 5, 2012

Penalty

Initial $1,200 · Current $600 Reduced

General-duty citation text

29 CFR 1926.100(a):     Employees working in areas where there is a possible danger of head injury from impact, or from falling or flying objects, or from electrical shock and burns, were not protected by protective helmets:      At the worksite:  On or about August 1, 2012, and at times prior thereto, the employer did not require the use of head protection while employees were working in an area with overhead hazards present.  Employees were exposed to struck-by hazards from falling and flying objects.

Issued

Nov 1, 2012

Abate by

Nov 16, 2012

Penalty

Initial $2,800 · Current $1,400 Reduced

General-duty citation text

29 CFR 1926.451(a)(6):     Scaffolds were not designed by a qualified person and were not constructed and loaded in accordance with that design:    At the job site, on or about August 1, 2012, and at times prior thereto, the employer allowed employees to use an elevated work platform supported by a rough terrain forklift that was not designed by a qualified person.  Employees were exposed to fall from heights hazards.

Issued

Nov 1, 2012

Abate by

Nov 5, 2012

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1926.451(c)(2)(v):     Fork-lifts were used to support scaffold platforms while the entire platform was not attached to the forks:    At the worksite:  On or about August 1, 2012, and at times prior thereto, the employer allowed employees to use a rough terrain type forklift to support an elevated work platform without being attached to the forks.  Employees were exposed to the hazard of fall from heights.