OSHA Inspection: BOB LYNCH MOVING & STORAGE, INC.

Issued

Oct 17, 2012

Abate by

Nov 7, 2012

Penalty

Initial $1,080 · Current $1,080

General-duty citation text

29 CFR 1910.178(l)(6):  The employer did not certify that each operator had been trained and evaluated as required by this paragraph (l):    a.  On or about 8/03/2012, Bob Lynch Moving & Storage, Inc - warehouse area,  Cyril E. King Airport Cargo Center #4, St Thomas, VI:  Power industrial trucks were used on a daily basis to transport warehouse materials during loading/unloading operations.  The employer did not certify that each operator had been trained and evaluated.    Note:  Certification and documentation of abatement must be submitted for this citation item as required by 29 CFR 1903.19(c) and (d), respectively.

Issued

Oct 17, 2012

Abate by

Nov 7, 2012

Penalty

Initial $1,800 · Current $1,800

General-duty citation text

29 CFR 1910.304(b)(3)(ii)(A):   All 125-volt, single-phase, 15-, 20-, and 30-ampere receptacle outlets that were not part of the permanent wiring of the building or structure and that were in use by personnel did not have ground-fault circuit-interrupter protection for personnel.    a. On or about 8/03/2012, Bob Lynch Moving & Storage, Inc. - warehouse area, Cyril E. King Airport Cargo Center #4, St Thomas, VI:  Employees were using electrical power tools connected to an electrical receptacle lacking a ground fault circuit interrupter (GFCI).    Note:  Certification and documentation of abatement must be submitted for this citation item as required by 29 CFR 1903.19(c) and (d), respectively.

Issued

Oct 17, 2012

Abate by

Nov 7, 2012

Penalty

Initial $1,800 · Current $1,800

General-duty citation text

29 CFR 1910.305(b)(2)(i): Pull boxes, junction boxes, and fittings were not provided with covers approved for the purpose:    a.    On or about 8/03/2012, Bob Lynch Moving & Storage, Inc - warehouse area,  Cyril E. King Airport Cargo Center #4, St Thomas, VI:  Employees have been using electrical power tools connected to a metal outlet box. The MT outlet box lacked a face plate cover.    NOTE:   Certification and documentation of abatement must be submitted for this citation item as required by 29 CFR 1903.19(c) and (d), respectively

Issued

Oct 17, 2012

Abate by

Nov 7, 2012

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1910.334(a)(2)(i):  Portable cord and plug connected equipment and flexible cord sets (extension cords) were not visually inspected before use on any shift for external defects (such as loose parts, deformed and missing pins, or damage to outer jacket or insulation) and for evidence of possible internal damage (such as pinched or crushed outer jacket):      a. On or about 8/03/2012, Bob Lynch Moving & Storage, Inc. - warehouse area, Cyril E. King Airport Cargo Center #4, St Thomas, VI:  Employees were using electrical power tools to secure materials inside an intermodal container.  The electrical cord had its outer jacket broken.    Note:  Certification and documentation of abatement must be submitted for this citation item as required by 29 CFR 1903.19(c) and (d), respectively.