PLEASANTON, TX ·
OSHA Inspection: HALO OILFIELD & ELECTRICAL SERVICES, LLC
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of HALO OILFIELD & ELECTRICAL SERVICES, LLC in 1169 WEST OAKLAWN (HIGHWAY 97), PLEASANTON, TX 78064 (NAICS 238130). OSHA activity number 335771382.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- HALO OILFIELD & ELECTRICAL SERVICES, LLC
- Site address
- 1169 WEST OAKLAWN (HIGHWAY 97)
- City
- PLEASANTON
- State
- TX
- ZIP
- 78064
- Mailing
- 513 AVENUE C ROAD, POTEET, TX 78065
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- Non-union (B)
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238130
- Employees
- 6
- Ownership type
- Private (A)
Citations
6 citations on file for this inspection.
1926.102 A01
- Issued
- Aug 29, 2012
- Abate by
- Sep 8, 2012
- Penalty
- Initial $1,600 · Current $1,600
General-duty citation text
29 CFR 1926.102(a)(1): Eye and face protective equipment were not used when machines or operations presented potential eye or face injury from physical, chemical, or radiation agents: a) 1169 Oaklawn (Highway 97) Pleasanton, TX 78064: On August 16, 2012 and at times prior there to, employee(s) were using a pneumatic nail gun without eye protection and were exposed to hazards from flying debris.
Recent events (1)
- · Z (S) $1600
1926.451 B02
- Issued
- Aug 29, 2012
- Abate by
- Sep 8, 2012
- Penalty
- Initial $1,600 · Current $1,600
General-duty citation text
29 CFR 1926.451(b)(2): Scaffold platforms and walkways were not at least 18 inches wide: a) 1169 Oaklawn (Highway 97) Pleasanton, TX 78064: On August 16, 2012 and at times prior there to, employee(s) were using a jobsite made scaffold that ranged in width between 7 and 10 inches exposing employee(s) to falls due to losing their footing.
Recent events (1)
- · Z (S) $1600
1926.451 C02
- Issued
- Aug 29, 2012
- Abate by
- Sep 8, 2012
- Penalty
- Initial $1,600 · Current $1,600
General-duty citation text
29 CFR 1926.451(c)(2): Supported scaffold poles, legs, posts, frames, or uprights did not bear on base plates, mud sills or other adequate firm foundation: a) 1169 Oaklawn (Highway 97) Pleasanton, TX 78064: On August 16, 2012 and at times prior there to, employee(s) were using a jobsite made scaffold that did not have base plates or mud sills exposing employee(s) to falls due to the scaffold shifting or collapsing.
Recent events (1)
- · Z (S) $1600
1926.451 E01
- Issued
- Aug 29, 2012
- Abate by
- Sep 8, 2012
- Penalty
- Initial $1,600 · Current $1,600
General-duty citation text
29 CFR 1926.451(e)(1): When scaffold platforms were more than 2 feet (0.6 m) above or below a point of access, portable ladders, hook-on ladders, attachable ladders, stair towers (scaffold stairways/towers), stairway-type ladders (such as ladder stands), ramps, walkways, integral prefabricated scaffold access, or direct access from other scaffold, sturcure, personnel hoist, or similar surface was not used. a) 1169 Oaklawn (Highway 97) Pleasanton, TX 78064: On August 16, 2012 and at times prior there to, employee(s) were using a jobsite made scaffold that did not have a ladder or other means to access the scaffold exposing employee(s) to falls due to accessing the scaffold without a ladder.
Recent events (1)
- · Z (S) $1600
1926.454 A
- Issued
- Aug 29, 2012
- Abate by
- Sep 8, 2012
- Penalty
- Initial $1,600 · Current $1,600
General-duty citation text
29 CFR 1926.454(a): The employer did not have each employee who performed work while on a scaffold trained by a person qualified in the subject matter to recognize the hazards associated with the type of scaffold being used and to understand the procedures to control or minimize those hazards. a) 1169 Oaklawn (Highway 97) Pleasanton, TX 78064: On August 16, 2012 and at times prior there to, employee(s) were using a jobsite made scaffold and the employee(s) were not trained on the hazards associated with working on scaffolds.
Recent events (1)
- · Z (S) $1600
1926.454 B
- Issued
- Aug 29, 2012
- Abate by
- Sep 8, 2012
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.454(b): The employer did not have each employee involved in erecting, disassembling, moving, operating, repairing, maintaining, or inspecting a scaffold trained by a competent person to recognize any hazards associated with the work in question. a) 1169 Oaklawn (Highway 97) Pleasanton, TX 78064: On August 16, 2012 and at times prior there to, employee(s) were using a jobsite made scaffold that was not erected by employees who were trained by a competent person.
Recent events (1)
- · Z (S) $0
More inspections in this industry (NAICS 238130)
More inspections in TX
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 335771382.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.