FORT PAYNE, AL —
OSHA Inspection: GH METAL SOLUTIONS, INC.
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of GH METAL SOLUTIONS, INC. in 2890 AIRPORT RD, FORT PAYNE, AL 35968 (NAICS 332116). OSHA activity number 335817789.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- GH METAL SOLUTIONS, INC.
- Site address
- 2890 AIRPORT RD
- City
- FORT PAYNE
- State
- AL
- ZIP
- 35968
- Mailing
- 2890 AIRPORT RD, FORT PAYNE, AL 35968
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332116
- Employees
- 275
- Ownership type
- A
Citations
3 citations on file for this inspection.
1910.135 A01
- Issued
- Dec 10, 2012
- Penalty
- Initial $3,000 · Current $2,000 Reduced
General-duty citation text
29 CFR 1910.135(a)(1): The employer did not ensure that each affected employee wore a protective helmet when working in areas where there is a potential for injury to the head from falling objects: On or about 8/9/12 - at the Receiving Area, employees were not required to wear a protective helmet while operating a remote-controlled floor operated gantry crane to move material.
Recent events (3)
- — J (O) $2000
- — C (S) $3000
- — Z (S) $3000
1910.147 C04 I
- Issued
- Dec 10, 2012
- Abate by
- Dec 28, 2012
- Penalty
- Initial $3,000 · Current $2,000 Reduced
General-duty citation text
29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section: (a) On or about 8/9/12 - Press Room, a procedure was not utilized to control hazardous energy when employees change dies at the #812 Amada Press exposing employees to struck-by, caught-in and crushing hazards.
Recent events (3)
- — J (O) $2000
- — C (S) $3000
- — Z (S) $3000
1910.303 F01
- Issued
- Dec 10, 2012
- Abate by
- Dec 14, 2012
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.303(f)(1): Each disconnecting means for motors and appliances was not located and arranged so the purpose was evident, nor legibly marked to indicate its purpose: (a) On or about 8/9/12 - Press Room, two push button switches on the 812 Amada press were not legibly marked.
Recent events (3)
- — J (O) $0
- — C (O) $0
- — Z (O) $0
More inspections at GH Metal Solutions, INC.
View GH Metal Solutions, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 332116)
More inspections in AL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 335817789.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.