Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: SWARAJ CONSTRUCTION LLC

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of SWARAJ CONSTRUCTION LLC in 2502 BROAD AVENUE, ALTOONA, PA 16602 (NAICS 236116). OSHA activity number 335964193.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Swaraj Construction LLC — free Get an email when a new federal OSHA severe-injury report for Swaraj Construction LLC is published. One employer, no account, unsubscribe in one click.
Site address
2502 BROAD AVENUE
City
ALTOONA
State
PA
ZIP
16602
Mailing
1700 7TH AVENUE, ALTOONA, PA 16602
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
236116
Employees
4
Ownership type
A

4 citations on file for this inspection.

1926.451 B01

Serious Gravity 5 1 instance 1 exposed
Issued
Oct 22, 2012
Penalty
Initial $2,000 · Current $1,000 Reduced
29 CFR 1926.451(b)(1):  Each platform on all working levels of scaffolds was not fully planked or decked between the front uprights and the guardrail supports as follows:    a)  Jobsite at 2500-2502 Broad Avenue, Altoona, PA:  On or about September 24, 2012, an employee was working from a tubular welded frame scaffold and the working level was  not fully planked.  The fall hazard to the employee was approxiamtely 18 feet.
Recent events (2)
  • — I (S) $1000
  • — Z (S) $2000

1926.451 B10

Serious Gravity 5 1 instance 2 exposed
Issued
Oct 22, 2012
Penalty
Initial $0 · Current $0
29 CFR 1926.451(b)(10):  Scaffold components manufactured by different manufacturers shall not be intermixed unless the components fit together without force and the scaffold's structural integrity is maintained by the user. Scaffold components manufactured by different manufacturers shall not be modified in order to intermix them unless a competent person determines the resulting scaffold is structurally sound.    a) Jobsite at 2500-2502 Broad Avenue, Altoona, PA:  On or about September 24, 2012, two employees were working from different scaffold components that were used to make one scaffold.  A tubular welded frame scaffold and a ladder jack scaffold were used to form a scaffold.  The two employees were working from this combination of scaffolding types.  The fall hazard to the two employees was approximately 18 feet to the ground.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1926.451 G01

Serious Gravity 5 1 instance 2 exposed
Issued
Oct 22, 2012
Penalty
Initial $2,000 · Current $1,000 Reduced
29 CFR 1926.451(g)(1)(vii):  Each employee on a scaffold, not otherwise specified in paragraphs (g)(1)(i) through (g)(1)(vi) of this section, more than 10 feet above a lower level was not protected from falls by the use of personal fall arrest systems or guardrail systems meeting the requirements of paragraph (g)(4) of this section.    a) Jobsite at 2500-2502 Broad Avenue, Altoona, PA:  On or about September 24, 2012, employees were painting and performing exterior work from  scaffolding that did not have any guardrails on it, nor was any fall protection being utilized.  The fall hazard to the employees was approximately 18-20 feet to the ground below.
Recent events (2)
  • — I (S) $1000
  • — Z (S) $2000

1926.454 B

Serious Gravity 5 3 instances 4 exposed
Issued
Oct 22, 2012
Penalty
Initial $1,600 · Current $800 Reduced
29 CFR 1926.454(b):  The employer did not have each employee who is involved in erecting, disassembling, moving, operating, repairing, maintaining, or inspecting a scaffold trained by a competent person to recognize any hazards associated with the work in question. The training shall include the following topics, as applicablicable:      *The nature of scaffold hazards.    *The correct procedures for erecting, disassembling, moving, repairing, inspecting, and maintaining the type of scaffolds  in question.    *The design criteris, mazimum intended load-carrying capacity and intended use of the scaffold.    *Any other pertinent requirements of this subpart.        a) Jobsite at 2500-2502 Broad Avenue, Altoona, PA:  On or about September 24, 2012, the employer did not have each employee who erected, disassembled, maintained, inspected, repair or move a staffold trained by a competent person to recognize the hazards associated with this type of scaffold work.
Recent events (2)
  • — I (S) $800
  • — Z (S) $1600

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 335964193.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.