TULSA, OK —
OSHA Inspection: ALUMINUM HARDCOAT COMPANY
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of ALUMINUM HARDCOAT COMPANY in 6002 EAST TECUMSEH ST., TULSA, OK 74115 (NAICS 332813). OSHA activity number 336060181.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- ALUMINUM HARDCOAT COMPANY
- Site address
- 6002 EAST TECUMSEH ST.
- City
- TULSA
- State
- OK
- ZIP
- 74115
- Mailing
- 6002 EAST TECUMSEH ST., TULSA, OK 74115
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332813
- Employees
- 13
- Ownership type
- A
Citations
4 citations on file for this inspection.
1910.215 A04
- Issued
- Oct 10, 2012
- Abate by
- Oct 31, 2012
- Penalty
- Initial $1,200 · Current $720 Reduced
General-duty citation text
29 CFR 1910.215(a)(4): Work rest(s) on grinding machinery were not adjusted closely to the wheel with a maximum opening of one eighth inch: On or about August 28, 2012, and at times prior thereto, in the maintenance shop employees were operating an abrasive wheel grinding machine where the opening between the work rest and the wheel was greater than one-eighth inch. Employees were exposed to flying fragments in the event of an exploding wheel.
Recent events (2)
- — I (S) $720
- — Z (S) $1200
1910.215 B09
- Issued
- Oct 10, 2012
- Abate by
- Oct 31, 2012
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.215(b)(9): Guard for abrasive wheel machine where the operator stands in front of the machine was not constructed so that the peripheral protecting member could be adjusted to the constantly decreasing diameter of the wheel: On or about August 28, 2012, and at times prior thereto, in the maintenance shop employees were operating an abrasive wheel grinding machine which did not have a tongue guard provided. Employees were exposed to flying fragments in the event of an exploding wheel.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.215 D03
- Issued
- Oct 10, 2012
- Abate by
- Oct 31, 2012
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.215(d)(3): The contact surface(s) of wheel(s), blotter(s) or flange(s) on grinding machine(s) were not flat and free or foreign matter: On or about August 28, 2012, and at times prior thereto in the machine shop area the employer allowed employees to operate abrasive wheel grinding machines that had the abrasive wheels unevenly worn and foreign objects deposited on the wheel. The employees were exposed to flying fragments in the event of exploding wheels.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.253 B04 III
- Issued
- Oct 10, 2012
- Abate by
- Oct 11, 2012
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.253(b)(4)(iii): Oxygen cylinders in storage were not separated from fuel-gas cylinders or combustible materials (especially oil or grease), a minimum distance of 20 feet (6.1 m) or by a noncombustible barrier at least 5 feet (1.5 m) high having a fire-resistance rating of at least one-half hour: On or about August 28, 2012, and at times prior thereto, in the maintenance shop empty oxygen and acetylene cylinders were found stored together without a noncombustible barrier at least 5 feet (1.5 m) high having a fire-resistance rating of at least one-half hour. Employees may expose to fire hazards.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections in this industry (NAICS 332813)
More inspections in OK
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 336060181.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.