DALTON, GA —
OSHA Inspection: DALTEK, LLC
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of DALTEK, LLC in 1030 VISTA DRIVE, DALTON, GA 30721 (NAICS 326199). OSHA activity number 336082383.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- DALTEK, LLC
- Site address
- 1030 VISTA DRIVE
- City
- DALTON
- State
- GA
- ZIP
- 30721
- Mailing
- 1030 VISTA DRIVE, DALTON, GA 30721
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 326199
- Employees
- 82
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.147 C04 II
- Issued
- Nov 14, 2012
- Abate by
- Nov 27, 2012
- Penalty
- Initial $2,975 · Current $1,785 Reduced
General-duty citation text
29 CFR 1910.147(c)(4)(ii): The energy control procedures did not clearly and specifically outline the scope, purpose, authorization, rules, and techniques to be utilized for the control of hazardous energy, including, but not limited to Items of this sec (a) Employees performing maintenance and adjustments on the press brake, shear, and horizontal band saw were exposed to amputation and crushing hazards as there were no specific, step by step, procedures, means or methods identified for the control of unexpected startup or the release of stored energy.
Recent events (2)
- — I (S) $1785
- — Z (S) $2975
1910.147 C06 I
- Issued
- Nov 14, 2012
- Abate by
- Nov 20, 2012
- Penalty
- Initial $4,900 · Current $2,940 Reduced
General-duty citation text
29 CFR 1910.147(c)(6)(i): The employer shall conduct a periodic inspection of the energy control procedure at least annually to ensure that the procedure and the requirements of this standard are being followed. (a) Employees performing maintenance and adjustments a press brake, horizontal band saw, and a shear were exposed to amputation and crushing hazards as there were no periodic inspections of the Lockout/Tagout program or procedures to make certain that the requirements of this standard was being met.
Recent events (2)
- — I (S) $2940
- — Z (S) $4900
1910.147 C07 I B
- Issued
- Nov 14, 2012
- Abate by
- Nov 20, 2012
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(c)(7)(i)(B): Each affected employee shall be instructed in the purpose and use of the energy control procedure. (a) Machine and equipment operators were not trained as to the purpose and use of the employers energy control procedures while maintenance and adjustments was being performed
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.212 A03 II
- Issued
- Nov 14, 2012
- Abate by
- Nov 27, 2012
- Penalty
- Initial $2,975 · Current $1,785 Reduced
General-duty citation text
29 CFR 1910.212(a)(3)(ii): Point(s) of operation of machinery were not guarded to prevent employee(s) from having any part of their body in the danger zone(s) during operating cycle(s): (a) Employees operating a hydraulic press brake, a shear, and a horizontal band saw were not protected, guarded, from the point of operation hazards.
Recent events (2)
- — I (S) $1785
- — Z (S) $2975
1910.215 A03
- Issued
- Nov 14, 2012
- Abate by
- Nov 21, 2012
- Penalty
- Initial $2,975 · Current $1,785 Reduced
General-duty citation text
29 CFR 1910.215(a)(3): Grinding machine(s) were not equipped with flanges in accordance with 29 CFR 1910.215(c): (a) A mounted bench grinder was missing the tongue guard, flange, from the right grinding wheel. The employees were exposed to being struck by exploding and/or flying fragments of the wheel.
Recent events (2)
- — I (S) $1785
- — Z (S) $2975
More inspections at Daltek, LLC
View Daltek, LLC's full OSHA safety record →
More inspections in this industry (NAICS 326199)
More inspections in GA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 336082383.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.