WHEATLAND, PA —
OSHA Inspection: PRECISION CUT INC.
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of PRECISION CUT INC. in 25 N. RAILROAD STREET, WHEATLAND, PA 16161 (NAICS 332999). OSHA activity number 336106851.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- PRECISION CUT INC.
- Site address
- 25 N. RAILROAD STREET
- City
- WHEATLAND
- State
- PA
- ZIP
- 16161
- Mailing
- 25 N. RAILROAD STREET, WHEATLAND, PA 16161
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332999
- Employees
- 10
- Ownership type
- A
Citations
3 citations on file for this inspection.
1910.147 C01
- Issued
- Sep 26, 2012
- Abate by
- Oct 18, 2012
- Penalty
- Initial $2,000 · Current $1,200 Reduced
General-duty citation text
29 CFR 1910.147(c)(1): The employer did not establish a program consisting of an energy control procedure, employee training and periodic inspections to ensure that before any employee performed any servicing or maintenance on a machine or equipment where the unexpected energing, startup or release of stored energy could occur and cause injury, the machine or equipment shall be isolated from the energy source and rendered inoperative: A. Precision Cut Inc./Lockout-Tagout Program- On or about 8/31/12, a lockout/tagout program consisting of machine specific lockout/tagout procedures, authorized employee training, affected employee training, lockout/tagout hardware, and periodic inspections was not developed and implemented. Personnel performed servicing, blade changes, and maintenance work on machinery that include but was not limited to, the CM-100 Saw.
Recent events (2)
- — I (S) $1200
- — Z (S) $2000
1910.179 J02
- Issued
- Sep 26, 2012
- Abate by
- Nov 15, 2012
- Penalty
- Initial $1,200 · Current $720 Reduced
General-duty citation text
29 CFR 1910.179(j)(2): The following items were not be inspected for defects at intervals as defined in paragraph (j)(1)(ii) of this section or as specifically indicated, including observation during operation for any defects which might appear between regular inspections: A) Precision Cut Inc., Morgan South Crane - On or about 8/28/12, the crane had not had an annual/periodic inspection in over a year. The last completed inspection was in April of 4/11. B) Precision Cut Inc., Meco Matic North Crane - On or about 8/28/12, the crane had not had an annual/periodic inspection in over a year. The last completed inspection was in April of 4/11.
Recent events (2)
- — I (S) $720
- — Z (S) $1200
1910.305 G01 IV A
- Issued
- Sep 26, 2012
- Abate by
- Oct 18, 2012
- Penalty
- Initial $1,600 · Current $960 Reduced
General-duty citation text
29 CFR 1910.305(g)(1)(iv)(A): Flexible cords and cables were used as a substitute for the fixed wiring of a structure A.) Precision Cut Inc. - On or about 8/31/12, extension cords were used to power two (2) scales in the saw area.
Recent events (2)
- — I (S) $960
- — Z (S) $1600
More inspections at Precision CUT INC.
View Precision CUT INC.'s full OSHA safety record →
More inspections in this industry (NAICS 332999)
More inspections in PA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 336106851.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.